Xfce Forum

Sub domains
 

You are not logged in.

Pages: 1

#1 2014-10-10 22:01:34

philippe972
Member
From: France
Registered: 2014-10-10
Posts: 7

[Solved] compositing

Im under fedora 20 xfce and when i try to enable compositing i have a black screen and can't do anything.
Any ideas ?

Offline

#2 2014-10-11 00:44:07

ozjd
Member
From: Hawkesbury NSW Australia
Registered: 2012-02-05
Posts: 560
Website

Re: [Solved] compositing

Sounds like a graphics driver issue. What graphics card do you have and which driver are you using?

Offline

#3 2014-10-11 12:53:30

philippe972
Member
From: France
Registered: 2014-10-10
Posts: 7

Re: [Solved] compositing

lspci |grep -i VGA
01:00.0 VGA compatible controller: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] (rev 01)
02:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G400/G450 (rev 85)

Offline

#4 2014-10-12 00:15:19

ozjd
Member
From: Hawkesbury NSW Australia
Registered: 2012-02-05
Posts: 560
Website

Re: [Solved] compositing

You have 2 cards, probably the S3 is on the motherboard and the Matrox is an added card. The Matrox should be using the mga driver and I believe should have support for compositing. Which are you using and what driver?

BTW both these are old cards and if I read the Fedora packagedb correctly may not be supported in 21.

Offline

#5 2014-10-12 11:41:17

philippe972
Member
From: France
Registered: 2014-10-10
Posts: 7

Re: [Solved] compositing

I think i use the Matrox card but i don't know how to find the driver ?

Offline

#6 2014-10-12 11:57:45

ozjd
Member
From: Hawkesbury NSW Australia
Registered: 2012-02-05
Posts: 560
Website

Re: [Solved] compositing

There is probably an easier way but if you look at /var/log/Xorg.1.log and find the line with the driver name.

Offline

#7 2014-10-12 13:36:24

philippe972
Member
From: France
Registered: 2014-10-10
Posts: 7

Re: [Solved] compositing

it seems the mga driver is in use :

cat /var/log/Xorg.0.log

[    16.985] 	Module class: X.Org Video Driver
[    16.985] 	ABI class: X.Org Video Driver, version 14.1
[    16.985] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
	mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
	mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
	mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550
[    16.985] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    16.985] (II) FBDEV: driver for framebuffer: fbdev
[    16.985] (II) VESA: driver for VESA chipsets: vesa
[    16.985] (++) using VT number 1

[    16.987] (WW) Falling back to old probe method for modesetting
[    16.987] (EE) open /dev/dri/card0: No such file or directory
[    16.987] (WW) Falling back to old probe method for fbdev
[    16.987] (II) Loading sub module "fbdevhw"
[    16.987] (II) LoadModule: "fbdevhw"
[    16.987] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.988] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.988] 	compiled for 1.14.4, module version = 0.0.2
[    16.988] 	ABI class: X.Org Video Driver, version 14.1
[    16.988] (WW) Falling back to old probe method for vesa
[    16.988] (II) Loading sub module "vgahw"
[    16.988] (II) LoadModule: "vgahw"
[    16.988] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    16.989] (II) Module vgahw: vendor="X.Org Foundation"
[    16.989] 	compiled for 1.14.4, module version = 0.1.0
[    16.989] 	ABI class: X.Org Video Driver, version 14.1
[    16.989] (--) MGA(0): Chipset: "mgag400" (G450)
[    16.989] (--) MGA(0): Linear framebuffer at 0xD8000000
[    16.989] (--) MGA(0): MMIO registers at 0xDA000000
[    16.989] (--) MGA(0): Pseudo-DMA transfer window at 0xDB000000
[    16.990] (II) MGA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    16.990] (==) MGA(0): Depth 24, (--) framebuffer bpp 32
[    16.990] (==) MGA(0): RGB weight 888
[    16.990] (==) MGA(0): Using HW cursor
[    16.990] (**) MGA(0): Using "Shadow Framebuffer" - acceleration disabled
[    16.990] (--) MGA(0): Video BIOS info block at offset 0x07CE0
[    16.990] (==) MGA(0): VideoRAM: 32768 kByte
[    16.990] (II) Loading sub module "ddc"
[    16.990] (II) LoadModule: "ddc"
[    16.990] (II) Module "ddc" already built-in
[    16.990] (II) Loading sub module "i2c"
[    16.990] (II) LoadModule: "i2c"
[    16.990] (II) Module "i2c" already built-in
[    16.990] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    16.992] (II) MGA(0): I2C bus "DDC P1" initialized.
[    16.992] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
[    18.396] (--) MGA(0): No DDC signal
[    18.396] (II) Loading sub module "vbe"
[    18.396] (II) LoadModule: "vbe"
[    18.396] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    18.397] (II) Module vbe: vendor="X.Org Foundation"
[    18.397] 	compiled for 1.14.4, module version = 1.1.0
[    18.397] 	ABI class: X.Org Video Driver, version 14.1
[    18.397] (II) Loading sub module "int10"
[    18.397] (II) LoadModule: "int10"
[    18.397] (II) Loading /usr/lib/xorg/modules/libint10.so
[    18.397] (II) Module int10: vendor="X.Org Foundation"
[    18.397] 	compiled for 1.14.4, module version = 1.0.0
[    18.397] 	ABI class: X.Org Video Driver, version 14.1
[    18.397] (II) MGA(0): initializing int10
[    18.399] (II) MGA(0): Primary V_BIOS segment is: 0xc000
[    18.399] (II) MGA(0): VESA BIOS detected
[    18.399] (II) MGA(0): VESA VBE Version 3.0
[    18.399] (II) MGA(0): VESA VBE Total Mem: 32768 kB
[    18.399] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
[    18.399] (II) MGA(0): VESA VBE OEM Software Rev: 1.3
[    18.399] (II) MGA(0): VESA VBE OEM Vendor: Matrox
[    18.399] (II) MGA(0): VESA VBE OEM Product: Matrox G450
[    18.400] (II) MGA(0): VESA VBE OEM Product Rev: 00
[    18.400] (II) Loading sub module "ddc"
[    18.400] (II) LoadModule: "ddc"
[    18.400] (II) Module "ddc" already built-in
[    19.356] (II) MGA(0): VESA VBE DDC supported
[    19.357] (II) MGA(0): VESA VBE DDC Level 2
[    19.357] (II) MGA(0): VESA VBE DDC transfer in appr. 1 sec.
[    20.311] (II) MGA(0): VESA VBE DDC read successfully
[    20.311] (II) MGA(0): VBE monitor info
[    20.311] (II) MGA(0): Manufacturer: GSM  Model: 5777  Serial#: 16843009
[    20.311] (II) MGA(0): Year: 2009  Week: 1
[    20.311] (II) MGA(0): EDID Version: 1.3
[    20.311] (II) MGA(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    20.311] (II) MGA(0): Sync:  Separate
[    20.311] (II) MGA(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    20.311] (II) MGA(0): Gamma: 2.20
[    20.311] (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    20.311] (II) MGA(0): First detailed timing is preferred mode
[    20.311] (II) MGA(0): redX: 0.644 redY: 0.336   greenX: 0.301 greenY: 0.611
[    20.311] (II) MGA(0): blueX: 0.146 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    20.311] (II) MGA(0): Supported established timings:
[    20.311] (II) MGA(0): 720x400@70Hz
[    20.311] (II) MGA(0): 640x480@60Hz
[    20.311] (II) MGA(0): 640x480@75Hz
[    20.311] (II) MGA(0): 800x600@60Hz
[    20.311] (II) MGA(0): 800x600@75Hz
[    20.311] (II) MGA(0): 832x624@75Hz
[    20.311] (II) MGA(0): 1024x768@60Hz
[    20.311] (II) MGA(0): 1024x768@75Hz
[    20.311] (II) MGA(0): 1280x1024@75Hz
[    20.311] (II) MGA(0): 1152x864@75Hz
[    20.311] (II) MGA(0): Manufacturer's mask: 0
[    20.311] (II) MGA(0): Supported standard timings:
[    20.311] (II) MGA(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    20.311] (II) MGA(0): #1: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[    20.311] (II) MGA(0): #2: hsize: 1152  vsize 864  refresh: 60  vid: 16497
[    20.311] (II) MGA(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    20.311] (II) MGA(0): #4: hsize: 1280  vsize 960  refresh: 75  vid: 20353
[    20.311] (II) MGA(0): #5: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    20.312] (II) MGA(0): Supported detailed timing:
[    20.312] (II) MGA(0): clock: 138.5 MHz   Image Size:  598 x 336 mm
[    20.312] (II) MGA(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    20.312] (II) MGA(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    20.312] (II) MGA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    20.312] (II) MGA(0): Monitor name: M237WDP
[    20.312] (II) MGA(0): Monitor name: 
[    20.312] (II) MGA(0): EDID (in hex):
[    20.312] (II) MGA(0): 	00ffffffffffff001e6d775701010101
[    20.312] (II) MGA(0): 	0113010368331d78eac285a4564d9c25
[    20.312] (II) MGA(0): 	125054a56b808180818f7140b300814f
[    20.312] (II) MGA(0): 	714f010101011a3680a070381f403020
[    20.312] (II) MGA(0): 	350056502100001a000000fd00384b1e
[    20.312] (II) MGA(0): 	5311000a202020202020000000fc004d
[    20.312] (II) MGA(0): 	3233375744500a2020202020000000fc
[    20.312] (II) MGA(0): 	000a2020202020202020202020200030
[    20.312] (II) MGA(0): end of monitor info
[    20.316] (II) MGA(0): EDID vendor "GSM", prod id 22391
[    20.316] (II) MGA(0): Using EDID range info for horizontal sync
[    20.316] (II) MGA(0): Using EDID range info for vertical refresh
[    20.316] (II) MGA(0): Printing DDC gathered Modelines:
[    20.316] (II) MGA(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[    20.316] (II) MGA(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.316] (II) MGA(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    20.316] (II) MGA(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.316] (II) MGA(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    20.316] (II) MGA(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    20.317] (II) MGA(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    20.317] (II) MGA(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.317] (II) MGA(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    20.317] (II) MGA(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    20.317] (II) MGA(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    20.317] (II) MGA(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    20.317] (II) MGA(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    20.317] (II) MGA(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    20.317] (II) MGA(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.2 kHz e)
[    20.317] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
[    20.317] (==) MGA(0): Min pixel clock is 17 MHz
[    20.317] (--) MGA(0): Max pixel clock is 1200 MHz
[    20.317] (II) MGA(0): <default monitor>: Using hsync range of 30.00-83.00 kHz
[    20.317] (II) MGA(0): <default monitor>: Using vrefresh range of 56.00-75.00 Hz
[    20.317] (II) MGA(0): <default monitor>: Using maximum pixel clock of 175.00 MHz
[    20.317] (II) MGA(0): Estimated virtual size for aspect ratio 1.7586 is 1920x1080
[    20.317] (II) MGA(0): Clock range:  17.75 to 1200.00 MHz
[    20.317] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[    20.317] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[    20.317] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    20.317] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    20.317] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[    20.317] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "512x384i" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
[    20.317] (II) MGA(0): Not using default mode "1280x960" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "640x480" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "640x512" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1600x1200" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "800x600" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1792x1344" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "1792x1344" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "896x672" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1856x1392" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1856x1392" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "928x696" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1920x1440" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1920x1440" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "1920x1440" (height too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "960x720" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "2048x1536" (width too large for virtual size)
[    20.317] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[    20.317] (II) MGA(0): Not using default mode "2048x1536" (width too large for virtual size)
[    20.318] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[    20.318] (II) MGA(0): Not using default mode "2048x1536" (width too large for virtual size)
[    20.318] (II) MGA(0): Not using default mode "1024x768" (hsync out of range)
[    20.318] (--) MGA(0): Has SDRAM
[    20.318] (--) MGA(0): Virtual size is 1920x1080 (pitch 1920)
[    20.318] (**) MGA(0): *Driver mode "1920x1080": 138.5 MHz, 66.6 kHz, 59.9 Hz
[    20.318] (II) MGA(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz ezP)
[    20.318] (**) MGA(0): *Driver mode "1680x1050": 146.2 MHz, 65.3 kHz, 60.0 Hz
[    20.318] (II) MGA(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz ez)
[    20.318] (**) MGA(0): *Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
[    20.318] (II) MGA(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz zd)
[    20.318] (**) MGA(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
[    20.318] (II) MGA(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz zd)
[    20.318] (**) MGA(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
[    20.318] (II) MGA(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz ez)
[    20.318] (**) MGA(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[    20.318] (II) MGA(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz ez)
[    20.318] (**) MGA(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
[    20.318] (II) MGA(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz zd)
[    20.318] (**) MGA(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[    20.318] (II) MGA(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz zd)
[    20.318] (**) MGA(0): *Driver mode "1280x960": 129.9 MHz, 75.2 kHz, 75.0 Hz
[    20.318] (II) MGA(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 -hsync +vsync (75.2 kHz ez)
[    20.318] (**) MGA(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
[    20.318] (II) MGA(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz zd)
[    20.318] (**) MGA(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[    20.318] (II) MGA(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz ez)
[    20.318] (**) MGA(0): *Driver mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
[    20.318] (II) MGA(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz ez)
[    20.318] (**) MGA(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[    20.318] (II) MGA(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz zd)
[    20.318] (**) MGA(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[    20.318] (II) MGA(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz ez)
[    20.318] (**) MGA(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[    20.318] (II) MGA(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz ez)
[    20.318] (**) MGA(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[    20.318] (II) MGA(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz zd)
[    20.318] (**) MGA(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[    20.318] (II) MGA(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz zd)
[    20.319] (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[    20.319] (II) MGA(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz zd)
[    20.319] (**) MGA(0): *Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz zd)
[    20.319] (**) MGA(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[    20.319] (II) MGA(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz ez)
[    20.319] (**) MGA(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[    20.319] (II) MGA(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz zd)
[    20.319] (**) MGA(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[    20.319] (II) MGA(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz ez)
[    20.319] (**) MGA(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[    20.319] (II) MGA(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz ez)
[    20.319] (**) MGA(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[    20.319] (II) MGA(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz zd)
[    20.319] (**) MGA(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[    20.319] (II) MGA(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz zd)
[    20.319] (**) MGA(0): *Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz zd)
[    20.319] (**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[    20.319] (II) MGA(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz zd)
[    20.319] (**) MGA(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz zd)
[    20.319] (**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[    20.319] (II) MGA(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz zd)
[    20.319] (**) MGA(0): *Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
[    20.319] (II) MGA(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz zd)
[    20.319] (**) MGA(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz zd)
[    20.319] (**) MGA(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz zd)
[    20.319] (**) MGA(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz zd)
[    20.319] (**) MGA(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[    20.319] (II) MGA(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz ez)
[    20.319] (**) MGA(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[    20.319] (II) MGA(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz ez)
[    20.319] (**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[    20.319] (II) MGA(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz zd)
[    20.319] (**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[    20.319] (II) MGA(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz zd)
[    20.319] (**) MGA(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz zd)
[    20.319] (**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[    20.319] (II) MGA(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz zd)
[    20.319] (**) MGA(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
[    20.319] (II) MGA(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz ez)
[    20.319] (**) MGA(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz zd)
[    20.319] (**) MGA(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz zd)
[    20.319] (**) MGA(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
[    20.319] (II) MGA(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz zd)
[    20.319] (**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[    20.319] (II) MGA(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[    20.319] (**) MGA(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
[    20.320] (II) MGA(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz zd)
[    20.320] (**) MGA(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
[    20.320] (II) MGA(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz zd)
[    20.320] (**) MGA(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
[    20.320] (II) MGA(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz zd)
[    20.320] (**) MGA(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[    20.320] (II) MGA(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[    20.320] (**) MGA(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[    20.320] (II) MGA(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[    20.320] (**) MGA(0): Display dimensions: (510, 290) mm
[    20.320] (**) MGA(0): DPI set to (95, 94)
[    20.320] (II) MGA(0): YDstOrg is set to 0
[    20.320] (II) Loading sub module "fb"
[    20.320] (II) LoadModule: "fb"
[    20.320] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.321] (II) Module fb: vendor="X.Org Foundation"
[    20.321] 	compiled for 1.14.4, module version = 1.0.0
[    20.321] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.321] (II) Loading sub module "ramdac"
[    20.321] (II) LoadModule: "ramdac"
[    20.321] (II) Module "ramdac" already built-in
[    20.321] (II) Loading sub module "shadowfb"
[    20.321] (II) LoadModule: "shadowfb"
[    20.321] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    20.322] (II) Module shadowfb: vendor="X.Org Foundation"
[    20.322] 	compiled for 1.14.4, module version = 1.0.0
[    20.322] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.322] (II) UnloadModule: "modesetting"
[    20.322] (II) Unloading modesetting
[    20.322] (II) UnloadModule: "fbdev"
[    20.322] (II) Unloading fbdev
[    20.322] (II) UnloadSubModule: "fbdevhw"
[    20.322] (II) Unloading fbdevhw
[    20.322] (II) UnloadModule: "vesa"
[    20.322] (II) Unloading vesa
[    20.322] (--) Depth 24 pixmap format is 32 bpp
[    20.323] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    20.333] (--) MGA(0): 16 DWORD fifo
[    20.341] (==) MGA(0): Default visual is TrueColor
[    20.341] (==) MGA(0): Backing store disabled
[    20.341] (==) MGA(0): Silken mouse enabled
[    20.342] (==) MGA(0): DPMS enabled
[    20.342] (==) RandR enabled
[    20.342] (II) Found 2 VGA devices: arbiter wrapping enabled
[    20.355] (II) SELinux: Disabled by boolean
[    20.357] (II) AIGLX: Screen 0 is not DRI2 capable
[    20.357] (II) AIGLX: Screen 0 is not DRI capable
[    21.536] (II) AIGLX: Loaded and initialized swrast
[    21.536] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    21.783] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    21.783] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.783] (**) Power Button: Applying InputClass "system-keyboard"
[    21.783] (II) LoadModule: "evdev"
[    21.783] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.784] (II) Module evdev: vendor="X.Org Foundation"
[    21.784] 	compiled for 1.14.4, module version = 2.8.4
[    21.784] 	Module class: X.Org XInput Driver
[    21.784] 	ABI class: X.Org XInput driver, version 19.2
[    21.784] (II) Using input driver 'evdev' for 'Power Button'
[    21.784] (**) Power Button: always reports core events
[    21.784] (**) evdev: Power Button: Device: "/dev/input/event1"
[    21.784] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.785] (--) evdev: Power Button: Found keys
[    21.785] (II) evdev: Power Button: Configuring as keyboard
[    21.785] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    21.785] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.785] (**) Option "xkb_rules" "evdev"
[    21.785] (**) Option "xkb_model" "pc104"
[    21.785] (**) Option "xkb_layout" "fr"
[    21.785] (**) Option "xkb_variant" "oss"
[    21.830] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    21.830] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.830] (**) Power Button: Applying InputClass "system-keyboard"
[    21.830] (II) Using input driver 'evdev' for 'Power Button'
[    21.830] (**) Power Button: always reports core events
[    21.830] (**) evdev: Power Button: Device: "/dev/input/event0"
[    21.830] (--) evdev: Power Button: Vendor 0 Product 0x1
[    21.830] (--) evdev: Power Button: Found keys
[    21.831] (II) evdev: Power Button: Configuring as keyboard
[    21.831] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    21.831] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    21.831] (**) Option "xkb_rules" "evdev"
[    21.831] (**) Option "xkb_model" "pc104"
[    21.831] (**) Option "xkb_layout" "fr"
[    21.831] (**) Option "xkb_variant" "oss"
[    21.832] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    21.832] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    21.832] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    21.832] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    21.832] (**) Logitech USB Receiver: always reports core events
[    21.832] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[    21.832] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[    21.832] (--) evdev: Logitech USB Receiver: Found keys
[    21.832] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    21.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/0003:046D:C517.0001/input/input5/event2"
[    21.832] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[    21.832] (**) Option "xkb_rules" "evdev"
[    21.832] (**) Option "xkb_model" "pc104"
[    21.832] (**) Option "xkb_layout" "fr"
[    21.832] (**) Option "xkb_variant" "oss"
[    21.834] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    21.834] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    21.834] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    21.834] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    21.834] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    21.834] (**) Logitech USB Receiver: always reports core events
[    21.834] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[    21.834] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[    21.834] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[    21.834] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    21.834] (--) evdev: Logitech USB Receiver: Found relative axes
[    21.834] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    21.834] (--) evdev: Logitech USB Receiver: Found absolute axes
[    21.834] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    21.834] (--) evdev: Logitech USB Receiver: Found keys
[    21.834] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    21.834] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    21.834] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    21.834] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    21.834] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.834] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:046D:C517.0002/input/input6/event3"
[    21.834] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[    21.834] (**) Option "xkb_rules" "evdev"
[    21.834] (**) Option "xkb_model" "pc104"
[    21.834] (**) Option "xkb_layout" "fr"
[    21.834] (**) Option "xkb_variant" "oss"
[    21.835] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    21.835] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    21.835] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    21.835] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    21.835] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    21.835] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    21.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    21.843] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    21.843] (II) No input driver specified, ignoring this device.
[    21.843] (II) This device may have been added with another device file.

Last edited by ToZ (2014-10-12 13:52:37)

Offline

#8 2014-10-12 21:57:41

ozjd
Member
From: Hawkesbury NSW Australia
Registered: 2012-02-05
Posts: 560
Website

Re: [Solved] compositing

If I read that correctly both are active. Both VESA and mga drivers are loaded. VESA won't give you compositing. Not sure how to fix that. Maybe you could ask on the Fedora Forums as it is a Fedora issue rather than Xfce.

Offline

#9 2014-10-13 18:21:08

philippe972
Member
From: France
Registered: 2014-10-10
Posts: 7

Re: [Solved] compositing

Thank you for your help.
i will try on fedora forum.

Offline

Pages: 1

Board footer

Powered by FluxBB