You are not logged in.
- Topics: Active | Unanswered
#1 2025-08-12 09:39:36
- openmindculture
- Member
- Registered: 2025-08-01
- Posts: 4
Black screen with mouse pointer after Xfce Login in Mint 22 wilma Tuxe
Since two weeks, when I log into an Xfce4 session, the screen stays black, there is only a movable mouse pointer, but no menus, no right click, nothing interactive. Xfce, xfwm and compositor still work, as I can see when I either force another X session from a text cosole, or when I am lucky that one of the workarounds leads to a fully functional working Xfce desktop session.
I already checked system information, xsession erros, contacted my vendor, and posted on Linux Mint forums where it was recommended to follow up in the Xfce forum.
Workarounds that sometimes work:
- The blackscreen issue used to happen erratically first, so a reboot "solved" the problem. One day, rebooting was not enough anymore.
- All other workarounds start with switching to a console session using Ctrl+Alt+F1
- if there is no cursor, type any key,
- log in at the login prompt,
- do one of the following:
- remove blackbox screensaver: `sudo apt remove blackbox`
- get all updates: `sudo apt update && sudo apt
- find, kill, and replace the running desktop session:
- `ps -aux | grep xfce`
- `kill -9` (+ the process id of the xfce session)
- `startx` or `startxfce4` (without lightdm)
- switch back to the graphical desktop session using Ctrl+Alt+F7
The hardware manufacturer, Tuxedo, and a Linux Mint forum user both suggested updating my BIOS, but I fear that I might risk getting even more problems, as I still hope this is just a software/configuration issue.
Alternatively, the hardware manufacturer suggested to switch from their kernel to a default Linux kernel, but I fear I might lose working hardware support, especially for my laptop touchscreen.
System information from `lsb_release -a && uname -a && inxi && sudo lshw -C display && echo $XDG_SESSION_TYPE && xfwm4 --version` and diagnosis tool:
- Linux Mint 22 wilma
- Linux 6.11.0-120029-tuxedo #29~24.04.1tux2 SMP PREEMPT_DYNAMIC Wed Jul 2 13:51:09 UTC 2025 x86_64 x86_64 x86_64 GNU/Linux
- CPU: quad core 11th Gen Intel Core i5-1135G7 (-MT MCP-)
- speed/min/max: 1554/400/4200 MHz Kernel: 6.11.0-120029-tuxedo x86_64
- Up: 2h 30m Mem: 9.15/31.14 GiB (29.4%) Storage: 931.51 GiB (12.2% used)
- Procs: 389 Shell: Bash inxi: 3.3.34
- display:
- description: VGA compatible controller
- product: TigerLake-LP GT2 [Iris Xe Graphics]
- vendor: Intel Corporation
- physical id: 2
- bus info: pci@0000:00:02.0
- logical name: /dev/fb0
- version: 01
- width: 64 bits
- clock: 33MHz
- capabilities: vga_controller bus_master cap_list rom fb
- $XDG_SESSION_TYPE: x11
- xfwm4 version 4.18.0 (revision 7e7473c5b) for Xfce 4.18
- Compiled against GTK+-3.24.41, using GTK+-3.24.41
Build configuration and supported features:
- Startup notification support: Yes
- XSync support: Yes
- Render support: Yes
- Xrandr support: Yes
- Xpresent support: Yes
- X Input 2 support: No
- Embedded compositor: Yes
- Epoxy support: Yes
- Tuxedo tomte configuration
- cardreader-fix 1
- gfxmode 1
- linux-tuxedo-24.04
- tuxedo-control-center 2.1.17
- tuxedo-drivers 1
- tuxedo-repos 4
System:
Kernel: 6.11.0-120029-tuxedo arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.41 wm: xfwm4 v: 4.18.0 with: xfce4-panel
tools: light-locker vt: 7 dm: LightDM v: 1.30.0 Distro: Linux Mint 22 Wilma
base: Ubuntu 24.04 noble
Machine:
Type: Laptop System: TUXEDO product: TUXEDO InfinityBook S 15 Gen6 v: N/A
serial: <superuser required> Chassis: Notebook type: 10 serial: <superuser required>
Mobo: TUXEDO model: NS50MU serial: <superuser required> uuid: <superuser required> UEFI: INSYDE
v: 1.07.03RTR date: 09/07/2020
Battery:
ID-1: BAT0 charge: 46.2 Wh (100.0%) condition: 46.2/73.9 Wh (62.5%) volts: 8.4 min: 7.7
model: Notebook BAT type: Li-ion serial: <filter> status: full
CPU:
Info: quad core model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP smt: enabled
arch: Tiger Lake rev: 1 cache: L1: 320 KiB L2: 5 MiB L3: 8 MiB
Speed (MHz): avg: 2594 high: 3956 min/max: 400/4200 cores: 1: 3494 2: 3951 3: 400 4: 1900
5: 3637 6: 3956 7: 3015 8: 400 bogomips: 38707
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: CLEVO/KAPOK driver: i915 v: kernel
arch: Gen-12.1 ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, HDMI-A-1 bus-ID: 00:02.0
chip-ID: 8086:9a49 class-ID: 0300
Device-2: Chicony USB2.0 Camera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1
bus-ID: 3-7:5 chip-ID: 04f2:b6f9 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 compositor: xfwm4 v: 4.18.0
driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: BOE Display 0x07d8 res: 1920x1080 hz: 60 dpi: 142
size: 344x194mm (13.54x7.64") diag: 395mm (15.5") modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris device: 1 drv: swrast gbm:
drv: iris surfaceless: drv: iris x11: drv: iris inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.2.8-1ubuntu1~24.04.1 glx-v: 1.4
direct-render: yes renderer: Mesa Intel Xe Graphics (TGL GT2) device-ID: 8086:9a49
Audio:
Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: CLEVO/KAPOK driver: snd_hda_intel
v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a0c8 class-ID: 0403
API: ALSA v: k6.11.0-120029-tuxedo status: kernel-api
Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: CLEVO/KAPOK RTL8111/8168/8411 driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1
port: 3000 bus-ID: 34:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp52s0 state: down mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: speed: 5 GT/s lanes: 1
bus-ID: 35:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp53s0 state: up mac: <filter>
IF-ID-1: br-1246d6c40fcf state: down mac: <filter>
IF-ID-2: br-34b7046e7767 state: down mac: <filter>
IF-ID-3: br-506d42132df9 state: down mac: <filter>
IF-ID-4: br-6b0306b2e806 state: down mac: <filter>
IF-ID-5: br-cdaf41310752 state: down mac: <filter>
IF-ID-6: br-f80e0d331dd3 state: down mac: <filter>
IF-ID-7: docker0 state: down mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1
bus-ID: 3-10:6 chip-ID: 8087:0029 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block:
hardware: no software: yes address: <filter>
Drives:
Local Storage: total: 931.51 GiB used: 113.79 GiB (12.2%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB
speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 2B2QEXM7 temp: 35.9 C scheme: GPT
Partition:
ID-1: / size: 911.78 GiB used: 113.4 GiB (12.4%) fs: ext4 dev: /dev/dm-1 mapped: vgmint-root
ID-2: /boot size: 1.61 GiB used: 385.1 MiB (23.4%) fs: ext4 dev: /dev/nvme0n1p2
ID-3: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: partition size: 1.91 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/dm-2
mapped: vgmint-swap_1
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s lanes: 1
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s lanes: 1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0 speed: 480 Mb/s lanes: 1
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-1:8 info: Silicon Labs USB OPTICAL MOUSE type: mouse driver: hid-generic,usbhid
interfaces: 1 rev: 2.0 speed: 1.5 Mb/s lanes: 1 power: 100mA chip-ID: 10c4:8105 class-ID: 0301
Device-2: 3-3:9 info: TG3 K82A type: keyboard,HID driver: hid-generic,usbhid interfaces: 2
rev: 1.1 speed: 1.5 Mb/s lanes: 1 power: 100mA chip-ID: 0f39:0822 class-ID: 0300
Device-3: 3-5:4 info: Elan Micro ELAN:Fingerprint type: <vendor specific> driver: N/A
interfaces: 1 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 04f3:0c63 class-ID: 0000
Device-4: 3-7:5 info: Chicony USB2.0 Camera type: video driver: uvcvideo interfaces: 4 rev: 2.0
speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: 04f2:b6f9 class-ID: 0e02 serial: <filter>
Device-5: 3-10:6 info: Intel AX200 Bluetooth type: bluetooth driver: btusb interfaces: 2
rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 8087:0029 class-ID: e001
Hub-4: 4-0:1 info: super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s lanes: 1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 58.0 C mobo: N/A
Fan Speeds (rpm): N/A
Repos:
Packages: 2285 pm: dpkg pkgs: 2277 pm: flatpak pkgs: 8
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/docker.list
1: deb [arch=amd64 signed-by=/etc/apt/keyrings/docker.asc] https: //download.docker.com/linux/ubuntu noble stable
Active apt repos in: /etc/apt/sources.list.d/friendsofshopware-stable.list
1: deb [signed-by=/usr/share/keyrings/friendsofshopware-stable-archive-keyring.gpg] https: //dl.cloudsmith.io/public/friendsofshopware/stable/deb/linuxmint wilma main
2: deb-src [signed-by=/usr/share/keyrings/friendsofshopware-stable-archive-keyring.gpg] https: //dl.cloudsmith.io/public/friendsofshopware/stable/deb/linuxmint wilma main
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https: //dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb https: //mirrors.tuxedocomputers.com/ubuntu/mirror/archive.ubuntu.com/ubuntu noble main restricted universe multiverse
2: deb https: //mirrors.tuxedocomputers.com/ubuntu/mirror/security.ubuntu.com/ubuntu noble-security main restricted universe multiverse
3: deb https: //mirrors.tuxedocomputers.com/ubuntu/mirror/archive.ubuntu.com/ubuntu noble-updates main restricted universe multiverse
4: deb http: //packages.linuxmint.com wilma main upstream import backport
Active apt repos in: /etc/apt/sources.list.d/signal-xenial.list
1: deb [arch=amd64 signed-by=/usr/share/keyrings/signal-desktop-keyring.gpg] https: //updates.signal.org/desktop/apt xenial main
Active apt repos in: /etc/apt/sources.list.d/vscodium.list
1: deb [signed-by=/usr/share/keyrings/vscodium-archive-keyring.gpg] https: //download.vscodium.com/debs vscodium main
No active apt repos in: /etc/apt/sources.list.d/windsurf.list
Active apt repos in: /etc/apt/sources.list.d/tuxedo-computers.sources
1: deb https: //deb.tuxedocomputers.com/ubuntu noble main
Info:
Memory: total: 32 GiB available: 31.14 GiB used: 8.77 GiB (28.1%)
Processes: 369 Power: uptime: 11h 2m states: freeze,mem,disk suspend: s2idle wakeups: 0
hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical
Compilers: gcc: 13.3.0 Client: Unknown python3.12 client inxi: 3.3.34Offline
#2 2025-08-12 10:17:09
- ToZ
- Administrator
- From: Canada
- Registered: 2011-06-02
- Posts: 12,388
Re: Black screen with mouse pointer after Xfce Login in Mint 22 wilma Tuxe
Hello and welcome.
It would be helpful if we can see your log files. Can you post the full contents of ~/.xsession-errors and /var/log/Xorg.0.log after a failed attempt?
Also do you have the xserver-xorg-video-intel package installed?
Mark solved threads as [SOLVED] to make it easier for others to find solutions.
--- How To Ask For Help | FAQ | Developer Wiki | Community | Contribute ---
Offline
#3 2025-08-12 12:59:26
- openmindculture
- Member
- Registered: 2025-08-01
- Posts: 4
Re: Black screen with mouse pointer after Xfce Login in Mint 22 wilma Tuxe
I have xserver-xorg-video-intel package installed.
I deleted my logs and rebooted, so here are the relevant parts of a black screen session:
~/.xsession-errors
Xsession: X session started for ingo at Tue Aug 12 02:50:08 PM CEST 2025
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting XAUTHORITY=/home/ingo/.Xauthority
dbus-update-activation-environment: setting XDG_CURRENT_DESKTOP=XFCE
localuser:ingo being added to access control list
dbus-update-activation-environment: setting XDG_DATA_DIRS=/usr/share/xfce4:/home/ingo/.local/share/flatpak/exports/share:/var/lib/flatpak/exports/share:/usr/local/share:/usr/share
dbus-update-activation-environment: setting GTK_MODULES=gail:atk-bridge
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1/var/log/Xorg.0.log
[ 21.513]
X.Org X Server 1.21.1.11
X Protocol Version 11, Revision 0
[ 21.513] Current Operating System: Linux ingofinitybook 6.11.0-121029-tuxedo #29~24.04.1tux1 SMP PREEMPT_DYNAMIC Thu Jul 24 07:58:12 UTC 2025 x86_64
[ 21.513] Kernel command line: BOOT_IMAGE=/vmlinuz-6.11.0-121029-tuxedo root=/dev/mapper/vgmint-root ro quiet splash
[ 21.513] xorg-server 2:21.1.12-1ubuntu1.4 (For technical support please see http://www.ubuntu.com/support)
[ 21.513] Current version of pixman: 0.42.2
[ 21.513] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.513] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.513] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 12 14:50:02 2025
[ 21.514] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.515] (==) No Layout section. Using the first Screen section.
[ 21.515] (==) No screen section available. Using defaults.
[ 21.515] (**) |-->Screen "Default Screen Section" (0)
[ 21.515] (**) | |-->Monitor "<default monitor>"
[ 21.515] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 21.515] (**) Allowing byte-swapped clients
[ 21.515] (==) Automatically adding devices
[ 21.515] (==) Automatically enabling devices
[ 21.515] (==) Automatically adding GPU devices
[ 21.515] (==) Automatically binding GPU devices
[ 21.515] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 21.516] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 21.516] Entry deleted from font path.
[ 21.517] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 21.517] Entry deleted from font path.
[ 21.517] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 21.517] Entry deleted from font path.
[ 21.517] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 21.517] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.517] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.517] (II) Loader magic: 0x5c24511d0020
[ 21.517] (II) Module ABI versions:
[ 21.517] X.Org ANSI C Emulation: 0.4
[ 21.517] X.Org Video Driver: 25.2
[ 21.517] X.Org XInput driver : 24.4
[ 21.517] X.Org Server Extension : 10.0
[ 21.517] (++) using VT number 7
[ 21.517] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 21.518] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 21.518] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 21.519] (--) PCI:*(0@0:2:0) 8086:9a49:1558:51a1 rev 1, Mem @ 0x6020000000/16777216, 0x4000000000/134217728, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 21.520] (II) LoadModule: "glx"
[ 21.521] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 21.525] (II) Module glx: vendor="X.Org Foundation"
[ 21.525] compiled for 1.21.1.11, module version = 1.0.0
[ 21.525] ABI class: X.Org Server Extension, version 10.0
[ 21.525] (==) Matched modesetting as autoconfigured driver 0
[ 21.525] (==) Matched fbdev as autoconfigured driver 1
[ 21.525] (==) Matched vesa as autoconfigured driver 2
[ 21.525] (==) Assigned the driver to the xf86ConfigLayout
[ 21.525] (II) LoadModule: "modesetting"
[ 21.525] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 21.525] (II) Module modesetting: vendor="X.Org Foundation"
[ 21.525] compiled for 1.21.1.11, module version = 1.21.1
[ 21.525] Module class: X.Org Video Driver
[ 21.525] ABI class: X.Org Video Driver, version 25.2
[ 21.525] (II) LoadModule: "fbdev"
[ 21.525] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 21.526] (II) Module fbdev: vendor="X.Org Foundation"
[ 21.526] compiled for 1.21.1.11, module version = 0.5.0
[ 21.526] Module class: X.Org Video Driver
[ 21.526] ABI class: X.Org Video Driver, version 25.2
[ 21.526] (II) LoadModule: "vesa"
[ 21.526] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 21.526] (II) Module vesa: vendor="X.Org Foundation"
[ 21.526] compiled for 1.21.1.7, module version = 2.6.0
[ 21.526] Module class: X.Org Video Driver
[ 21.526] ABI class: X.Org Video Driver, version 25.2
[ 21.526] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 21.526] (II) FBDEV: driver for framebuffer: fbdev
[ 21.526] (II) VESA: driver for VESA chipsets: vesa
[ 21.555] (II) modeset(0): using drv /dev/dri/card1
[ 21.555] (WW) Falling back to old probe method for fbdev
[ 21.555] (II) Loading sub module "fbdevhw"
[ 21.555] (II) LoadModule: "fbdevhw"
[ 21.556] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 21.556] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 21.556] compiled for 1.21.1.11, module version = 0.0.2
[ 21.556] ABI class: X.Org Video Driver, version 25.2
[ 21.556] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.556] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 21.556] (==) modeset(0): RGB weight 888
[ 21.556] (==) modeset(0): Default visual is TrueColor
[ 21.556] (II) Loading sub module "glamoregl"
[ 21.556] (II) LoadModule: "glamoregl"
[ 21.556] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 21.559] (II) Module glamoregl: vendor="X.Org Foundation"
[ 21.559] compiled for 1.21.1.11, module version = 1.0.1
[ 21.559] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.689] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Iris(R) Xe Graphics (TGL GT2)
[ 21.689] (II) modeset(0): glamor initialized
[ 21.689] (==) modeset(0): VariableRefresh: disabled
[ 21.689] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 21.691] (II) modeset(0): Output eDP-1 has no monitor section
[ 21.696] (II) modeset(0): Output HDMI-1 has no monitor section
[ 21.696] (II) modeset(0): Output DP-1 has no monitor section
[ 21.696] (II) modeset(0): Output DP-2 has no monitor section
[ 21.696] (II) modeset(0): Output DP-3 has no monitor section
[ 21.696] (II) modeset(0): Output DP-4 has no monitor section
[ 21.698] (II) modeset(0): EDID for output eDP-1
[ 21.698] (II) modeset(0): Manufacturer: BOE Model: 7d8 Serial#: 0
[ 21.698] (II) modeset(0): Year: 2018 Week: 1
[ 21.698] (II) modeset(0): EDID Version: 1.4
[ 21.698] (II) modeset(0): Digital Display Input
[ 21.698] (II) modeset(0): 6 bits per channel
[ 21.698] (II) modeset(0): Digital interface is DisplayPort
[ 21.698] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 21.698] (II) modeset(0): Gamma: 2.20
[ 21.698] (II) modeset(0): No DPMS capabilities specified
[ 21.698] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 21.698] (II) modeset(0): First detailed timing is preferred mode
[ 21.698] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 21.698] (II) modeset(0): redX: 0.649 redY: 0.344 greenX: 0.335 greenY: 0.620
[ 21.698] (II) modeset(0): blueX: 0.150 blueY: 0.061 whiteX: 0.312 whiteY: 0.328
[ 21.698] (II) modeset(0): Manufacturer's mask: 0
[ 21.698] (II) modeset(0): Supported detailed timing:
[ 21.698] (II) modeset(0): clock: 152.5 MHz Image Size: 344 x 194 mm
[ 21.698] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2230 h_border: 0
[ 21.698] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1140 v_border: 0
[ 21.698] (II) modeset(0): BOE CQ
[ 21.698] (II) modeset(0): NV156FHM-N63
[ 21.698] (II) modeset(0): EDID (in hex):
[ 21.698] (II) modeset(0): 00ffffffffffff0009e5d80700000000
[ 21.698] (II) modeset(0): 011c010495221378024fa0a658559e26
[ 21.698] (II) modeset(0): 0f505400000001010101010101010101
[ 21.698] (II) modeset(0): 010101010101953b803671383c403020
[ 21.698] (II) modeset(0): 360058c21000001a0000000000000000
[ 21.698] (II) modeset(0): 00000000000000000000000000fe0042
[ 21.698] (II) modeset(0): 4f452043510a202020202020000000fe
[ 21.698] (II) modeset(0): 004e5631353646484d2d4e36330a003c
[ 21.698] (II) modeset(0): Printing probed modes for output eDP-1
[ 21.698] (II) modeset(0): Modeline "1920x1080"x60.0 152.53 1920 1968 2000 2230 1080 1083 1089 1140 +hsync -vsync (68.4 kHz eP)
[ 21.698] (II) modeset(0): Modeline "1920x1080"x60.0 138.65 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz d)
[ 21.698] (II) modeset(0): Modeline "1680x1050"x60.0 119.23 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.8 kHz d)
[ 21.698] (II) modeset(0): Modeline "1400x1050"x60.0 122.05 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 21.698] (II) modeset(0): Modeline "1600x900"x60.0 97.78 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.6 kHz d)
[ 21.698] (II) modeset(0): Modeline "1280x1024"x60.0 107.96 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 21.698] (II) modeset(0): Modeline "1400x900"x60.0 86.67 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.6 kHz d)
[ 21.698] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 21.698] (II) modeset(0): Modeline "1440x810"x60.0 151.94 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (100.0 kHz d)
[ 21.698] (II) modeset(0): Modeline "1368x768"x60.0 72.43 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "1280x720"x60.0 64.02 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.5 kHz d)
[ 21.698] (II) modeset(0): Modeline "1024x768"x60.0 64.99 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 21.698] (II) modeset(0): Modeline "928x696"x60.0 109.06 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.3 kHz d)
[ 21.698] (II) modeset(0): Modeline "896x672"x60.0 102.37 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.6 kHz d)
[ 21.698] (II) modeset(0): Modeline "1024x576"x60.0 42.13 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.6 kHz d)
[ 21.698] (II) modeset(0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 21.698] (II) modeset(0): Modeline "960x540"x60.0 37.36 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "800x600"x60.0 38.40 800 824 896 1024 600 601 603 625 +hsync +vsync (37.5 kHz d)
[ 21.698] (II) modeset(0): Modeline "840x525"x60.0 59.62 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.8 kHz d)
[ 21.698] (II) modeset(0): Modeline "864x486"x60.0 30.72 864 912 944 1024 486 489 494 500 +hsync -vsync (30.0 kHz d)
[ 21.698] (II) modeset(0): Modeline "700x525"x60.0 61.02 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 21.698] (II) modeset(0): Modeline "800x450"x60.0 48.89 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.6 kHz d)
[ 21.698] (II) modeset(0): Modeline "640x512"x60.0 53.98 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 21.698] (II) modeset(0): Modeline "700x450"x60.0 43.34 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.6 kHz d)
[ 21.698] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 21.698] (II) modeset(0): Modeline "720x405"x60.0 22.12 720 768 800 880 405 408 413 419 +hsync -vsync (25.1 kHz d)
[ 21.698] (II) modeset(0): Modeline "684x384"x60.0 36.21 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "640x360"x60.0 17.95 640 688 720 800 360 363 368 374 +hsync -vsync (22.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "512x288"x60.0 21.03 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 21.698] (II) modeset(0): Modeline "480x270"x60.0 18.68 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "400x300"x60.0 19.17 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (37.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "432x243"x60.0 15.36 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (30.0 kHz d)
[ 21.698] (II) modeset(0): Modeline "320x240"x60.0 12.57 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.4 kHz d)
[ 21.698] (II) modeset(0): Modeline "360x202"x60.0 11.04 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (25.1 kHz d)
[ 21.698] (II) modeset(0): Modeline "320x180"x60.0 8.97 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.4 kHz d)
[ 21.703] (II) modeset(0): EDID for output HDMI-1
[ 21.703] (II) modeset(0): EDID for output DP-1
[ 21.703] (II) modeset(0): EDID for output DP-2
[ 21.703] (II) modeset(0): EDID for output DP-3
[ 21.703] (II) modeset(0): EDID for output DP-4
[ 21.703] (II) modeset(0): Output eDP-1 connected
[ 21.703] (II) modeset(0): Output HDMI-1 disconnected
[ 21.703] (II) modeset(0): Output DP-1 disconnected
[ 21.703] (II) modeset(0): Output DP-2 disconnected
[ 21.703] (II) modeset(0): Output DP-3 disconnected
[ 21.703] (II) modeset(0): Output DP-4 disconnected
[ 21.703] (II) modeset(0): Using exact sizes for initial modes
[ 21.703] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 21.703] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 21.703] (==) modeset(0): DPI set to (96, 96)
[ 21.703] (II) Loading sub module "fb"
[ 21.703] (II) LoadModule: "fb"
[ 21.703] (II) Module "fb" already built-in
[ 21.703] (II) UnloadModule: "fbdev"
[ 21.703] (II) Unloading fbdev
[ 21.703] (II) UnloadSubModule: "fbdevhw"
[ 21.703] (II) Unloading fbdevhw
[ 21.703] (II) UnloadModule: "vesa"
[ 21.703] (II) Unloading vesa
[ 21.726] (==) modeset(0): Backing store enabled
[ 21.726] (==) modeset(0): Silken mouse enabled
[ 21.806] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 21.806] (==) modeset(0): DPMS enabled
[ 21.806] (II) modeset(0): [DRI2] Setup complete
[ 21.807] (II) modeset(0): [DRI2] DRI driver: iris
[ 21.807] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 21.807] (II) Initializing extension Generic Event Extension
[ 21.807] (II) Initializing extension SHAPE
[ 21.807] (II) Initializing extension MIT-SHM
[ 21.807] (II) Initializing extension XInputExtension
[ 21.808] (II) Initializing extension XTEST
[ 21.808] (II) Initializing extension BIG-REQUESTS
[ 21.808] (II) Initializing extension SYNC
[ 21.808] (II) Initializing extension XKEYBOARD
[ 21.808] (II) Initializing extension XC-MISC
[ 21.809] (II) Initializing extension SECURITY
[ 21.809] (II) Initializing extension XFIXES
[ 21.809] (II) Initializing extension RENDER
[ 21.809] (II) Initializing extension RANDR
[ 21.809] (II) Initializing extension COMPOSITE
[ 21.810] (II) Initializing extension DAMAGE
[ 21.810] (II) Initializing extension MIT-SCREEN-SAVER
[ 21.810] (II) Initializing extension DOUBLE-BUFFER
[ 21.810] (II) Initializing extension RECORD
[ 21.810] (II) Initializing extension DPMS
[ 21.811] (II) Initializing extension Present
[ 21.811] (II) Initializing extension DRI3
[ 21.811] (II) Initializing extension X-Resource
[ 21.811] (II) Initializing extension XVideo
[ 21.811] (II) Initializing extension XVideo-MotionCompensation
[ 21.811] (II) Initializing extension SELinux
[ 21.811] (II) SELinux: Disabled on system
[ 21.811] (II) Initializing extension GLX
[ 21.826] (II) AIGLX: Loaded and initialized iris
[ 21.826] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.826] (II) Initializing extension XFree86-VidModeExtension
[ 21.826] (II) Initializing extension XFree86-DGA
[ 21.826] (II) Initializing extension XFree86-DRI
[ 21.826] (II) Initializing extension DRI2
[ 21.827] (II) modeset(0): Damage tracking initialized
[ 21.827] (II) modeset(0): Setting screen physical size to 508 x 285
[ 21.867] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 21.867] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 21.867] (II) LoadModule: "libinput"
[ 21.867] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 21.869] (II) Module libinput: vendor="X.Org Foundation"
[ 21.869] compiled for 1.21.1.11, module version = 1.4.0
[ 21.869] Module class: X.Org XInput Driver
[ 21.869] ABI class: X.Org XInput driver, version 24.4
[ 21.869] (II) Using input driver 'libinput' for 'Video Bus'
[ 21.869] (**) Video Bus: always reports core events
[ 21.869] (**) Option "Device" "/dev/input/event12"
[ 21.874] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 21.874] (II) event12 - Video Bus: device is a keyboard
[ 21.874] (II) event12 - Video Bus: device removed
[ 21.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event12"
[ 21.900] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 21.900] (**) Option "xkb_model" "pc105"
[ 21.900] (**) Option "xkb_layout" "de"
[ 21.928] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[ 21.928] (II) event12 - Video Bus: device is a keyboard
[ 21.929] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.929] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 21.929] (II) Using input driver 'libinput' for 'Power Button'
[ 21.929] (**) Power Button: always reports core events
[ 21.929] (**) Option "Device" "/dev/input/event0"
[ 21.929] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 21.929] (II) event0 - Power Button: device is a keyboard
[ 21.929] (II) event0 - Power Button: device removed
[ 21.947] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 21.947] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.947] (**) Option "xkb_model" "pc105"
[ 21.947] (**) Option "xkb_layout" "de"
[ 21.947] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 21.947] (II) event0 - Power Button: device is a keyboard
[ 21.947] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 21.947] (II) No input driver specified, ignoring this device.
[ 21.947] (II) This device may have been added with another device file.
[ 21.948] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 21.948] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 21.948] (II) Using input driver 'libinput' for 'Sleep Button'
[ 21.948] (**) Sleep Button: always reports core events
[ 21.948] (**) Option "Device" "/dev/input/event1"
[ 21.948] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 21.948] (II) event1 - Sleep Button: device is a keyboard
[ 21.948] (II) event1 - Sleep Button: device removed
[ 21.964] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 21.964] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 21.964] (**) Option "xkb_model" "pc105"
[ 21.964] (**) Option "xkb_layout" "de"
[ 21.964] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 21.964] (II) event1 - Sleep Button: device is a keyboard
[ 21.965] (II) config/udev: Adding input device YSPRINGTECH USB OPTICAL MOUSE (/dev/input/event6)
[ 21.965] (**) YSPRINGTECH USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[ 21.965] (II) Using input driver 'libinput' for 'YSPRINGTECH USB OPTICAL MOUSE'
[ 21.965] (**) YSPRINGTECH USB OPTICAL MOUSE: always reports core events
[ 21.965] (**) Option "Device" "/dev/input/event6"
[ 22.017] (II) event6 - YSPRINGTECH USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 22.017] (II) event6 - YSPRINGTECH USB OPTICAL MOUSE: device is a pointer
[ 22.017] (II) event6 - YSPRINGTECH USB OPTICAL MOUSE: device removed
[ 22.036] (II) libinput: YSPRINGTECH USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.036] (II) libinput: YSPRINGTECH USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.036] (II) libinput: YSPRINGTECH USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:10C4:8105.0002/input/input10/event6"
[ 22.036] (II) XINPUT: Adding extended input device "YSPRINGTECH USB OPTICAL MOUSE" (type: MOUSE, id 9)
[ 22.036] (**) Option "AccelerationScheme" "none"
[ 22.036] (**) YSPRINGTECH USB OPTICAL MOUSE: (accel) selected scheme none/0
[ 22.036] (**) YSPRINGTECH USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 22.036] (**) YSPRINGTECH USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 22.088] (II) event6 - YSPRINGTECH USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 22.088] (II) event6 - YSPRINGTECH USB OPTICAL MOUSE: device is a pointer
[ 22.089] (II) config/udev: Adding input device YSPRINGTECH USB OPTICAL MOUSE (/dev/input/mouse2)
[ 22.089] (II) No input driver specified, ignoring this device.
[ 22.089] (II) This device may have been added with another device file.
[ 22.089] (II) config/udev: Adding input device Heng Yu Technology K82A (/dev/input/event7)
[ 22.089] (**) Heng Yu Technology K82A: Applying InputClass "libinput keyboard catchall"
[ 22.089] (II) Using input driver 'libinput' for 'Heng Yu Technology K82A'
[ 22.089] (**) Heng Yu Technology K82A: always reports core events
[ 22.089] (**) Option "Device" "/dev/input/event7"
[ 22.090] (II) event7 - Heng Yu Technology K82A: is tagged by udev as: Keyboard
[ 22.090] (II) event7 - Heng Yu Technology K82A: device is a keyboard
[ 22.090] (II) event7 - Heng Yu Technology K82A: device removed
[ 22.101] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0F39:0822.0003/input/input11/event7"
[ 22.101] (II) XINPUT: Adding extended input device "Heng Yu Technology K82A" (type: KEYBOARD, id 10)
[ 22.101] (**) Option "xkb_model" "pc105"
[ 22.101] (**) Option "xkb_layout" "de"
[ 22.101] (II) event7 - Heng Yu Technology K82A: is tagged by udev as: Keyboard
[ 22.101] (II) event7 - Heng Yu Technology K82A: device is a keyboard
[ 22.102] (II) config/udev: Adding input device Heng Yu Technology K82A System Control (/dev/input/event8)
[ 22.102] (**) Heng Yu Technology K82A System Control: Applying InputClass "libinput keyboard catchall"
[ 22.102] (II) Using input driver 'libinput' for 'Heng Yu Technology K82A System Control'
[ 22.102] (**) Heng Yu Technology K82A System Control: always reports core events
[ 22.102] (**) Option "Device" "/dev/input/event8"
[ 22.102] (II) event8 - Heng Yu Technology K82A System Control: is tagged by udev as: Keyboard
[ 22.102] (II) event8 - Heng Yu Technology K82A System Control: device is a keyboard
[ 22.103] (II) event8 - Heng Yu Technology K82A System Control: device removed
[ 22.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:0F39:0822.0004/input/input12/event8"
[ 22.125] (II) XINPUT: Adding extended input device "Heng Yu Technology K82A System Control" (type: KEYBOARD, id 11)
[ 22.125] (**) Option "xkb_model" "pc105"
[ 22.125] (**) Option "xkb_layout" "de"
[ 22.125] (II) event8 - Heng Yu Technology K82A System Control: is tagged by udev as: Keyboard
[ 22.126] (II) event8 - Heng Yu Technology K82A System Control: device is a keyboard
[ 22.126] (II) config/udev: Adding input device Heng Yu Technology K82A Consumer Control (/dev/input/event9)
[ 22.126] (**) Heng Yu Technology K82A Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 22.126] (II) Using input driver 'libinput' for 'Heng Yu Technology K82A Consumer Control'
[ 22.126] (**) Heng Yu Technology K82A Consumer Control: always reports core events
[ 22.126] (**) Option "Device" "/dev/input/event9"
[ 22.127] (II) event9 - Heng Yu Technology K82A Consumer Control: is tagged by udev as: Keyboard
[ 22.127] (II) event9 - Heng Yu Technology K82A Consumer Control: device is a keyboard
[ 22.127] (II) event9 - Heng Yu Technology K82A Consumer Control: device removed
[ 22.152] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:0F39:0822.0004/input/input13/event9"
[ 22.152] (II) XINPUT: Adding extended input device "Heng Yu Technology K82A Consumer Control" (type: KEYBOARD, id 12)
[ 22.152] (**) Option "xkb_model" "pc105"
[ 22.152] (**) Option "xkb_layout" "de"
[ 22.153] (II) event9 - Heng Yu Technology K82A Consumer Control: is tagged by udev as: Keyboard
[ 22.153] (II) event9 - Heng Yu Technology K82A Consumer Control: device is a keyboard
[ 22.154] (II) config/udev: Adding input device ELAN0412:00 04F3:316F Mouse (/dev/input/event4)
[ 22.154] (**) ELAN0412:00 04F3:316F Mouse: Applying InputClass "libinput pointer catchall"
[ 22.154] (II) Using input driver 'libinput' for 'ELAN0412:00 04F3:316F Mouse'
[ 22.154] (**) ELAN0412:00 04F3:316F Mouse: always reports core events
[ 22.154] (**) Option "Device" "/dev/input/event4"
[ 22.168] (II) event4 - ELAN0412:00 04F3:316F Mouse: is tagged by udev as: Mouse Pointingstick
[ 22.168] (II) event4 - ELAN0412:00 04F3:316F Mouse: device is a pointer
[ 22.169] (II) event4 - ELAN0412:00 04F3:316F Mouse: device removed
[ 22.203] (II) libinput: ELAN0412:00 04F3:316F Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.203] (II) libinput: ELAN0412:00 04F3:316F Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.203] (II) libinput: ELAN0412:00 04F3:316F Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.203] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN0412:00/0018:04F3:316F.0001/input/input7/event4"
[ 22.203] (II) XINPUT: Adding extended input device "ELAN0412:00 04F3:316F Mouse" (type: MOUSE, id 13)
[ 22.203] (**) Option "AccelerationScheme" "none"
[ 22.203] (**) ELAN0412:00 04F3:316F Mouse: (accel) selected scheme none/0
[ 22.203] (**) ELAN0412:00 04F3:316F Mouse: (accel) acceleration factor: 2.000
[ 22.203] (**) ELAN0412:00 04F3:316F Mouse: (accel) acceleration threshold: 4
[ 22.205] (II) event4 - ELAN0412:00 04F3:316F Mouse: is tagged by udev as: Mouse Pointingstick
[ 22.206] (II) event4 - ELAN0412:00 04F3:316F Mouse: device is a pointer
[ 22.207] (II) config/udev: Adding input device ELAN0412:00 04F3:316F Mouse (/dev/input/mouse0)
[ 22.207] (II) No input driver specified, ignoring this device.
[ 22.207] (II) This device may have been added with another device file.
[ 22.207] (II) config/udev: Adding input device ELAN0412:00 04F3:316F Touchpad (/dev/input/event5)
[ 22.207] (**) ELAN0412:00 04F3:316F Touchpad: Applying InputClass "libinput touchpad catchall"
[ 22.207] (II) Using input driver 'libinput' for 'ELAN0412:00 04F3:316F Touchpad'
[ 22.207] (**) ELAN0412:00 04F3:316F Touchpad: always reports core events
[ 22.207] (**) Option "Device" "/dev/input/event5"
[ 22.208] (II) event5 - ELAN0412:00 04F3:316F Touchpad: is tagged by udev as: Touchpad
[ 22.209] (II) event5 - ELAN0412:00 04F3:316F Touchpad: device is a touchpad
[ 22.209] (II) event5 - ELAN0412:00 04F3:316F Touchpad: device removed
[ 22.233] (II) libinput: ELAN0412:00 04F3:316F Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.233] (II) libinput: ELAN0412:00 04F3:316F Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.233] (II) libinput: ELAN0412:00 04F3:316F Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 22.233] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-ELAN0412:00/0018:04F3:316F.0001/input/input9/event5"
[ 22.233] (II) XINPUT: Adding extended input device "ELAN0412:00 04F3:316F Touchpad" (type: TOUCHPAD, id 14)
[ 22.234] (**) Option "AccelerationScheme" "none"
[ 22.234] (**) ELAN0412:00 04F3:316F Touchpad: (accel) selected scheme none/0
[ 22.234] (**) ELAN0412:00 04F3:316F Touchpad: (accel) acceleration factor: 2.000
[ 22.234] (**) ELAN0412:00 04F3:316F Touchpad: (accel) acceleration threshold: 4
[ 22.234] (II) event5 - ELAN0412:00 04F3:316F Touchpad: is tagged by udev as: Touchpad
[ 22.235] (II) event5 - ELAN0412:00 04F3:316F Touchpad: device is a touchpad
[ 22.236] (II) config/udev: Adding input device ELAN0412:00 04F3:316F Touchpad (/dev/input/mouse1)
[ 22.236] (II) No input driver specified, ignoring this device.
[ 22.236] (II) This device may have been added with another device file.
[ 22.236] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 22.236] (II) No input driver specified, ignoring this device.
[ 22.236] (II) This device may have been added with another device file.
[ 22.236] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 22.236] (II) No input driver specified, ignoring this device.
[ 22.236] (II) This device may have been added with another device file.
[ 22.236] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 22.236] (II) No input driver specified, ignoring this device.
[ 22.236] (II) This device may have been added with another device file.
[ 22.236] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[ 22.237] (II) No input driver specified, ignoring this device.
[ 22.237] (II) This device may have been added with another device file.
[ 22.237] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event17)
[ 22.237] (II) No input driver specified, ignoring this device.
[ 22.237] (II) This device may have been added with another device file.
[ 22.237] (II) config/udev: Adding input device Intel HID events (/dev/input/event10)
[ 22.237] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[ 22.237] (II) Using input driver 'libinput' for 'Intel HID events'
[ 22.237] (**) Intel HID events: always reports core events
[ 22.237] (**) Option "Device" "/dev/input/event10"
[ 22.237] (II) event10 - Intel HID events: is tagged by udev as: Keyboard
[ 22.237] (II) event10 - Intel HID events: device is a keyboard
[ 22.237] (II) event10 - Intel HID events: device removed
[ 22.258] (**) Option "config_info" "udev:/sys/devices/platform/INTC1051:00/input/input14/event10"
[ 22.258] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 15)
[ 22.258] (**) Option "xkb_model" "pc105"
[ 22.258] (**) Option "xkb_layout" "de"
[ 22.259] (II) event10 - Intel HID events: is tagged by udev as: Keyboard
[ 22.259] (II) event10 - Intel HID events: device is a keyboard
[ 22.260] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 22.260] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 22.260] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 22.260] (**) AT Translated Set 2 keyboard: always reports core events
[ 22.260] (**) Option "Device" "/dev/input/event3"
[ 22.261] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 22.261] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 22.263] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 22.271] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 22.271] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 22.271] (**) Option "xkb_model" "pc105"
[ 22.271] (**) Option "xkb_layout" "de"
[ 22.272] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 22.272] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 22.277] (II) config/udev: Adding input device TUXEDO Keyboard (/dev/input/event11)
[ 22.277] (**) TUXEDO Keyboard: Applying InputClass "libinput keyboard catchall"
[ 22.277] (II) Using input driver 'libinput' for 'TUXEDO Keyboard'
[ 22.277] (**) TUXEDO Keyboard: always reports core events
[ 22.277] (**) Option "Device" "/dev/input/event11"
[ 22.278] (II) event11 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 22.278] (II) event11 - TUXEDO Keyboard: device is a keyboard
[ 22.278] (II) event11 - TUXEDO Keyboard: device removed
[ 22.307] (**) Option "config_info" "udev:/sys/devices/platform/tuxedo_keyboard/input/input15/event11"
[ 22.307] (II) XINPUT: Adding extended input device "TUXEDO Keyboard" (type: KEYBOARD, id 17)
[ 22.307] (**) Option "xkb_model" "pc105"
[ 22.307] (**) Option "xkb_layout" "de"
[ 22.308] (II) event11 - TUXEDO Keyboard: is tagged by udev as: Keyboard
[ 22.308] (II) event11 - TUXEDO Keyboard: device is a keyboard
[ 41.163] (II) event12 - Video Bus: device removed
[ 41.190] (II) event0 - Power Button: device removed
[ 41.200] (II) event1 - Sleep Button: device removed
[ 41.210] (II) event6 - YSPRINGTECH USB OPTICAL MOUSE: device removed
[ 41.230] (II) event7 - Heng Yu Technology K82A: device removed
[ 41.240] (II) event8 - Heng Yu Technology K82A System Control: device removed
[ 41.246] (II) event9 - Heng Yu Technology K82A Consumer Control: device removed
[ 41.266] (II) event4 - ELAN0412:00 04F3:316F Mouse: device removed
[ 41.286] (II) event5 - ELAN0412:00 04F3:316F Touchpad: device removed
[ 41.320] (II) event10 - Intel HID events: device removed
[ 41.327] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 41.337] (II) event11 - TUXEDO Keyboard: device removed
[ 41.353] (II) AIGLX: Suspending AIGLX clients for VT switchAdded later 01 min 48 s:
Additional observations: The behavior is still erratical: the black screen session that generated the logfiles above, later turned into a functional session when I switched back to it using Ctrl+Alt+F7, but most sessions don't. In rare occasions, after a reboot, everything works well without the black screen issue.
Offline
#4 2025-08-12 13:08:03
- ToZ
- Administrator
- From: Canada
- Registered: 2011-06-02
- Posts: 12,388
Re: Black screen with mouse pointer after Xfce Login in Mint 22 wilma Tuxe
The logs aren't showing any issues - are they from after the time the issue presented itself?
I have xserver-xorg-video-intel package installed.
I would try uninstalling it and rebooting. The kernel has built-in intel driver support that is more recent than the actual driver package and better supports newer intel graphics chips.
Mark solved threads as [SOLVED] to make it easier for others to find solutions.
--- How To Ask For Help | FAQ | Developer Wiki | Community | Contribute ---
Offline
#5 2025-08-12 13:27:00
- openmindculture
- Member
- Registered: 2025-08-01
- Posts: 4
Re: Black screen with mouse pointer after Xfce Login in Mint 22 wilma Tuxe
ToZ wrote:
The logs aren't showing any issues - are they from after the time the issue presented itself?
The logs reflect a defunct black screen session. I haven't found any explicit error or warning message anywhere yet.
Added later 03 min 51 s:
ToZ wrote:
I would try uninstalling it and rebooting.
Thanks for your tip!
I did `sudo apt remove xserver-xorg-video-intel package && sudo reboot` and the next startup had no black screen issue.
I will watch the next reboots and power off + restart, and either follow-up with more details or mark the issue als resolved.
Added later 17 h 37 min 38 s:
Removing xserver-xorg-video-intel package was not the solution yet.
2 x reboot = no problems;
shut down + turn on again = black screen issue;
shut down + turn on again = no problems;
The issue still occurs erratically.
Offline
#6 2025-08-13 14:47:55
- ToZ
- Administrator
- From: Canada
- Registered: 2011-06-02
- Posts: 12,388
Re: Black screen with mouse pointer after Xfce Login in Mint 22 wilma Tuxe
Do you get any "CPU pipe A FIFO underrun" messages in your journal?
Mark solved threads as [SOLVED] to make it easier for others to find solutions.
--- How To Ask For Help | FAQ | Developer Wiki | Community | Contribute ---
Offline
#7 2025-08-14 07:39:24
- openmindculture
- Member
- Registered: 2025-08-01
- Posts: 4
Re: Black screen with mouse pointer after Xfce Login in Mint 22 wilma Tuxe
ToZ wrote:
Do you get any "CPU pipe A FIFO underrun" messages in your journal?
No underrun log entries.
journalctl -S -15m | grep CPU | grep underrunToday, I did 4 consecutive startup attempts ending in a black screen. After spending about 10 minutes in the console examining my journalctl output, then switching back to Ctrl+Alt+F7, the graphical desktop eventually worked again.
Last edited by openmindculture (2025-08-14 07:40:19)
Offline
#8 2025-08-14 10:01:09
- ToZ
- Administrator
- From: Canada
- Registered: 2011-06-02
- Posts: 12,388
Re: Black screen with mouse pointer after Xfce Login in Mint 22 wilma Tuxe
You could try enabling the experimental Intel Xe driver to see if its better. Info on how to do this on Mint can be found here. Also here is the Arch Wiki entry with slightly different instructions.
Note that your chip ID is different s you'll need to use "9a49" instead of "46A6".
Mark solved threads as [SOLVED] to make it easier for others to find solutions.
--- How To Ask For Help | FAQ | Developer Wiki | Community | Contribute ---
Offline
- Registered users online in this topic: 0, guests: 1
- [Bot] ClaudeBot
[ Generated in 0.026 seconds, 8 queries executed - Memory usage: 824.38 KiB (Peak: 881.23 KiB) ]