Original Title:
Help to compile older Parole Media Player version: Downgrade to 1.0.5
Solution generously provided by ToZ here.
Just mind that the version in question is this one (1.0.5-1).
Other differences observed:
equivs built libxfce4util6_4.9.0_all.deb instead of libxfce4util6_1.0_all.deb,
and libxfconf-0-2_4.6.0_all.deb instead of libxfconf-0-2_1.0_all.deb,
but neither has any sort of impact on the outcome. It's just different names representing the versions they are.
Everything's OK!
UPDATE:
I was dumb and didn't have gstreamer installed… well, now autogen.sh did things properly and running gmake worked.
However, Parole doesn't work, running the binary from the src folder results in:
free(): invalid pointer
Aborted (core dumped)
Skimming the compiler output yields no errors.
Any ideas what's up? This release should technically work, at least it used to on older releases and I figure with a package conflict it wouldn't have compiled.
And I should read more carefully, heatwave or not.
Original Post:
Some optional background / trivia on the motivation for doing this:
▼'Story of my life'
I main Parole for the quick use because of its simplicity and came to like it. Now, for a while. I've tried to be friends with the new floating playlist 4.18 has, but it's impossible to have it visible and watch a video or have shortcut control over your stream/video/audio. It simply steals it, closes the playlist and only then you can do it. I see no option to have it open at all times without focus theft. Furthermore it's not automatically readjusting the video or visualiser aspect ratio as before, obscuring the image (nevermind my dislike of current floating rounded corners trends just putting me off).
In UX, as someone who used Parole regularly, I find those changes to have been a step back from its gradual improvement resulting in more clicks, obscuring of the media and inability to see your playlist while controlling your software, which I consider a big no-no for a media player to do.
This is why I want to regress to an older version.
Unfortunately, there's no release binaries of those, so compiling is the only option.
I still got those other matters of mine with the Window Buttons plugin to deal with and reports and requests to write (to conclude it), but before I dive back into it, I wanted to see if it is even any remotely reasonable idea to regress software that currently doesn't behave how I need it to behave.
Main takeaway: I want to use an older release as a test.
I downloaded the tar.gz of the source of 1.0.5, being the last I remember to behave the way I expect it to, as a test to see if I can even get as far as I want to from here: https://gitlab.xfce.org/apps/parole/-/t … _type=tags
Installed the xfce4 dev tools, cmake, build-essential, automake, checkinstall and so on.
I was sure I installed all necessary dependencies… but I still must be doing something wrong or maybe I miss something.
What I did:
I ran autogen.sh, output I got:
mkdir: cannot create directory ‘m4’: File exists
xdt-autogen: You must have "gtk-doc" installed.
Download the appropriate package for your distribution,
or get the source tarball at https://www.gtk.org.
So I installed the GTK doc package, ran it again and autogen did stuff.
There is a Makefile.am (came with the archive), and after running autogen.sh and configure, a Makefile.in too.
But running make in the parole-parole-1.0.5 directory results in:
make: *** No targets specified and no makefile found. Stop.
So I tried make -f Makefile.am, which did something… but I see nothing other than:
Means something concluded and cache got deleted. But I'm none the wiser because I see no binaries or alike.
Checked make's help but not seeing any verbosity flag which could help figure out what's up, or I'm just cooked by the warm weather we got and miss it.
Running with Makefile.in ended in:
Makefile.in:15: *** missing separator. Stop.
Quick check, the contents it complains about are this line: @SET_MAKE@
Full makefile in spoiler.
▼Makefile.in – long!
# Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \
$(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \
COPYING ChangeLog INSTALL NEWS README THANKS TODO compile \
config.guess config.sub install-sh ltmain.sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
GZIP_ENV = --best
DIST_ARCHIVES = $(distdir).tar.bz2
DIST_TARGETS = dist-bzip2
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALL_LINGUAS = @ALL_LINGUAS@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CLUTTERGTK_CFLAGS = @CLUTTERGTK_CFLAGS@
CLUTTERGTK_LIBS = @CLUTTERGTK_LIBS@
CLUTTERGTK_REQUIRED_VERSION = @CLUTTERGTK_REQUIRED_VERSION@
CLUTTERGTK_VERSION = @CLUTTERGTK_VERSION@
CLUTTER_CFLAGS = @CLUTTER_CFLAGS@
CLUTTER_LIBS = @CLUTTER_LIBS@
CLUTTER_REQUIRED_VERSION = @CLUTTER_REQUIRED_VERSION@
CLUTTER_VERSION = @CLUTTER_VERSION@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DBUS_CFLAGS = @DBUS_CFLAGS@
DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@
DBUS_GLIB_LIBS = @DBUS_GLIB_LIBS@
DBUS_GLIB_REQUIRED_VERSION = @DBUS_GLIB_REQUIRED_VERSION@
DBUS_GLIB_VERSION = @DBUS_GLIB_VERSION@
DBUS_LIBS = @DBUS_LIBS@
DBUS_REQUIRED_VERSION = @DBUS_REQUIRED_VERSION@
DBUS_VERSION = @DBUS_VERSION@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GIO_CFLAGS = @GIO_CFLAGS@
GIO_LIBS = @GIO_LIBS@
GIO_REQUIRED_VERSION = @GIO_REQUIRED_VERSION@
GIO_VERSION = @GIO_VERSION@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_LIBS = @GLIB_LIBS@
GLIB_REQUIRED_VERSION = @GLIB_REQUIRED_VERSION@
GLIB_VERSION = @GLIB_VERSION@
GMODULE_CFLAGS = @GMODULE_CFLAGS@
GMODULE_LIBS = @GMODULE_LIBS@
GMODULE_REQUIRED_VERSION = @GMODULE_REQUIRED_VERSION@
GMODULE_VERSION = @GMODULE_VERSION@
GMSGFMT = @GMSGFMT@
GOBJECT_CFLAGS = @GOBJECT_CFLAGS@
GOBJECT_LIBS = @GOBJECT_LIBS@
GOBJECT_REQUIRED_VERSION = @GOBJECT_REQUIRED_VERSION@
GOBJECT_VERSION = @GOBJECT_VERSION@
GREP = @GREP@
GST_BASE_CFLAGS = @GST_BASE_CFLAGS@
GST_BASE_LIBS = @GST_BASE_LIBS@
GST_BASE_REQUIRED_VERSION = @GST_BASE_REQUIRED_VERSION@
GST_BASE_VERSION = @GST_BASE_VERSION@
GST_CFLAGS = @GST_CFLAGS@
GST_LIBS = @GST_LIBS@
GST_PBUTILS_CFLAGS = @GST_PBUTILS_CFLAGS@
GST_PBUTILS_LIBS = @GST_PBUTILS_LIBS@
GST_PBUTILS_REQUIRED_VERSION = @GST_PBUTILS_REQUIRED_VERSION@
GST_PBUTILS_VERSION = @GST_PBUTILS_VERSION@
GST_REQUIRED_VERSION = @GST_REQUIRED_VERSION@
GST_VERSION = @GST_VERSION@
GST_VIDEO_CFLAGS = @GST_VIDEO_CFLAGS@
GST_VIDEO_LIBS = @GST_VIDEO_LIBS@
GST_VIDEO_REQUIRED_VERSION = @GST_VIDEO_REQUIRED_VERSION@
GST_VIDEO_VERSION = @GST_VIDEO_VERSION@
GTHREAD_CFLAGS = @GTHREAD_CFLAGS@
GTHREAD_LIBS = @GTHREAD_LIBS@
GTHREAD_REQUIRED_VERSION = @GTHREAD_REQUIRED_VERSION@
GTHREAD_VERSION = @GTHREAD_VERSION@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
GTK_REQUIRED_VERSION = @GTK_REQUIRED_VERSION@
GTK_VERSION = @GTK_VERSION@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
INTLTOOL_MERGE = @INTLTOOL_MERGE@
INTLTOOL_PERL = @INTLTOOL_PERL@
INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@
LIBNOTIFY_LIBS = @LIBNOTIFY_LIBS@
LIBNOTIFY_REQUIRED_VERSION = @LIBNOTIFY_REQUIRED_VERSION@
LIBNOTIFY_VERSION = @LIBNOTIFY_VERSION@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBX11_CFLAGS = @LIBX11_CFLAGS@
LIBX11_LDFLAGS = @LIBX11_LDFLAGS@
LIBX11_LIBS = @LIBX11_LIBS@
LIBXFCE4UI_CFLAGS = @LIBXFCE4UI_CFLAGS@
LIBXFCE4UI_LIBS = @LIBXFCE4UI_LIBS@
LIBXFCE4UI_REQUIRED_VERSION = @LIBXFCE4UI_REQUIRED_VERSION@
LIBXFCE4UI_VERSION = @LIBXFCE4UI_VERSION@
LIBXFCE4UTIL_CFLAGS = @LIBXFCE4UTIL_CFLAGS@
LIBXFCE4UTIL_LIBS = @LIBXFCE4UTIL_LIBS@
LIBXFCE4UTIL_REQUIRED_VERSION = @LIBXFCE4UTIL_REQUIRED_VERSION@
LIBXFCE4UTIL_VERSION = @LIBXFCE4UTIL_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PAROLE_VERINFO = @PAROLE_VERINFO@
PAROLE_VERSION_API = @PAROLE_VERSION_API@
PAROLE_VERSION_MAJOR = @PAROLE_VERSION_MAJOR@
PAROLE_VERSION_MICRO = @PAROLE_VERSION_MICRO@
PAROLE_VERSION_MINOR = @PAROLE_VERSION_MINOR@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TAGLIBC_CFLAGS = @TAGLIBC_CFLAGS@
TAGLIBC_LIBS = @TAGLIBC_LIBS@
TAGLIB_CFLAGS = @TAGLIB_CFLAGS@
TAGLIB_LIBS = @TAGLIB_LIBS@
TAGLIB_REQUIRED_VERSION = @TAGLIB_REQUIRED_VERSION@
TAGLIB_VERSION = @TAGLIB_VERSION@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XFCONF_CFLAGS = @XFCONF_CFLAGS@
XFCONF_LIBS = @XFCONF_LIBS@
XFCONF_REQUIRED_VERSION = @XFCONF_REQUIRED_VERSION@
XFCONF_VERSION = @XFCONF_VERSION@
XGETTEXT = @XGETTEXT@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
intltool__v_merge_options_ = @intltool__v_merge_options_@
intltool__v_merge_options_0 = @intltool__v_merge_options_0@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pixmapsdir = @pixmapsdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = \
data \
src \
docs \
po
EXTRA_DIST = \
intltool-extract.in \
intltool-merge.in \
intltool-update.in
DISTCLEANFILES = \
intltool-extract \
intltool-merge \
intltool-update
distuninstallcheck_listfiles = \
find -type f \! -name icon-theme.cache
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-zstd: distdir
tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
*.tar.zst*) \
zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-local distclean-tags
dvi: dvi-recursive
dvi-am:
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) all install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
dist-xz dist-zip dist-zstd distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
distclean-local distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
ps ps-am tags tags-am uninstall uninstall-am
.PRECIOUS: Makefile
distclean-local:
rm -rf *.cache
rpm: dist
rpmbuild -ta $(PACKAGE)-$(VERSION).tar.gz
@rm -f $(PACKAGE)-$(VERSION).tar.gz
html: Makefile
make -C doc html
dist-bz2: dist
zcat $(PACKAGE)-$(VERSION).tar.gz | \
bzip2 --best -c > $(PACKAGE)-$(VERSION).tar.bz2
distcheck-bz2: distcheck
zcat $(PACKAGE)-$(VERSION).tar.gz | \
bzip2 --best -c > $(PACKAGE)-$(VERSION).tar.bz2
snapshot: dist
mv $(PACKAGE)-$(VERSION).tar.gz \
$(PACKAGE)-$(VERSION)-r@REVISION@.tar.gz
snapshot-bz2: dist-bz2
mv $(PACKAGE)-$(VERSION).tar.bz2 \
$(PACKAGE)-$(VERSION)-r@REVISION@.tar.bz2
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
I switched into src and tried to use make there, same result, so I did make -f ./Makefile.in and had the same result, so I tried it with Makefile-am, which resulted in:
Makefile.am:101: *** missing separator. Stop.
The line it complains about is:
if PAROLE_CLUTTER_BACKEND
Full file contents:
▼Makefile.am in src
bin_PROGRAMS = parole
SUBDIRS = \
misc \
common \
gst \
dbus \
plugins
INCLUDES = \
-I$(top_srcdir) \
-I$(top_srcdir)/src/misc \
-I$(top_srcdir)/data \
-I$(top_srcdir)/data/mime \
-I$(top_srcdir)/src/gst \
-I$(top_srcdir)/src/dbus \
-I$(top_srcdir)/src/common \
-DLOCALEDIR=\"$(localedir)\" \
-DDESKTOPDIR=\"$(datadir)/applications\"\
-DG_LOG_DOMAIN=\"parole\" \
-DPAROLE_PLUGINS_DIR=\"$(libdir)/parole-$(PAROLE_VERSION_API)\"\
-DPAROLE_PLUGINS_DATA_DIR=\"$(datadir)/parole/parole-plugins-$(PAROLE_VERSION_API)\"\
-DPAROLE_COMPILATION \
$(GTHREAD_CFLAGS) \
$(GIO_CFLAGS) \
$(GMODULE_CFLAGS) \
$(DBUS_GLIB_CFLAGS) \
$(LIBXFCE4UI_CFLAGS) \
$(XFCONF_CFLAGS) \
$(GST_VIDEO_CFLAGS) \
$(GST_INTERFACES_CFLAGS) \
$(TAGLIBC_CFLAGS) \
$(LIBX11_CFLAGS)
GENERATED_FILES = \
gmarshal.c \
gmarshal.h \
enum-gtypes.c \
enum-gtypes.h \
org.parole.media.list.h \
org.parole.media.player.h
parole_SOURCES = \
$(GENERATED_FILES) \
main.c \
parole-player.c \
parole-player.h \
parole-vis.c \
parole-vis.h \
parole-medialist.c \
parole-medialist.h \
parole-mediachooser.c \
parole-mediachooser.h \
parole-conf.c \
parole-conf.h \
parole-conf-dialog.c \
parole-conf-dialog.h \
parole-disc.c \
parole-disc.h \
parole-utils.c \
parole-utils.h \
parole-plugins-manager.c \
parole-plugins-manager.h \
parole-module.c \
parole-module.h \
parole-about.c \
parole-about.h \
parole-shortcuts.c \
parole-shortcuts.h \
parole-builder.c \
parole-builder.h \
parole-subtitle-encoding.c \
parole-subtitle-encoding.h \
parole-open-location.c \
parole-open-location.h \
parole-button.c \
parole-button.h \
parole-plugin-player.c \
parole-plugin-player.h
parole_LDADD = \
$(top_builddir)/src/misc/libparole.la \
$(top_builddir)/src/dbus/libparoledbus.la \
$(top_builddir)/src/gst/libparolegst.la \
$(top_builddir)/src/common/libparolecommon.la \
$(top_builddir)/src/common/libparolescreensaver.la \
$(GTHREAD_LIBS) \
$(GIO_LIBS) \
$(GMODULE_LIBS) \
$(DBUS_GLIB_LIBS) \
$(LIBXFCE4UI_LIBS) \
$(XFCONF_LIBS) \
$(GST_VIDEO_LIBS) \
$(GST_INTERFACES_LIBS) \
$(TAGLIBC_LIBS) \
$(LIBX11_LIBS)
parole_glib_enum_headers = \
parole-conf.h \
parole-button.h
if PAROLE_CLUTTER_BACKEND
INCLUDES += \
$(CLUTTER_CFLAGS) \
$(CLUTTERGTK_CFLAGS)
parole_SOURCES += \
parole-clutter.c \
parole-clutter.h
parole_LDADD += \
$(CLUTTER_LIBS) \
$(CLUTTERGTK_LIBS)
endif
if MAINTAINER_MODE
BUILT_SOURCES = \
$(GENERATED_FILES)
gmarshal.c: gmarshal.list
echo "#include \"gmarshal.h\"" > $@ && \
glib-genmarshal $< --prefix=_gmarshal --body >> $@
gmarshal.h: gmarshal.list
glib-genmarshal $< --prefix=_gmarshal --header > $@
enum-gtypes.h: stamp-enum-gtypes.h
@true
stamp-enum-gtypes.h: $(parole_glib_enum_headers) Makefile
( cd $(srcdir) && glib-mkenums \
--fhead "#ifndef SRC_ENUM_GTYPES_H_\n#define SRC_ENUM_GTYPES_H_\n#include <glib-object.h>\nG_BEGIN_DECLS\n" \
--fprod "/* enumerations from \"@filename@\" */\n" \
--vhead "GType @enum_name@_get_type (void);\n#define ENUM_GTYPE_@ENUMSHORT@ (@enum_name@_get_type())\n" \
--ftail "G_END_DECLS\n\n#endif /* SRC_ENUM_GTYPES_H_ */" \
$(parole_glib_enum_headers) ) > xgen-enum.h \
&& (cmp -s xgen-enum.h enum-gtypes.h || cp xgen-enum.h enum-gtypes.h) \
&& rm -f xgen-enum.h \
&& echo timestamp > $(@F)
enum-gtypes.c: $(parole_glib_enum_headers) Makefile
( cd $(srcdir) && glib-mkenums \
--fhead "#include \"enum-gtypes.h\"\n\n" \
--fhead "#include \"parole-conf.h\"\n\n" \
--fhead "#include \"parole-button.h\"\n\n" \
--fprod "\n/* enumerations from \"@filename@\" */" \
--vhead "GType\n@enum_name@_get_type (void)\n{\n static GType etype = 0;\n if (etype == 0) {\n static const G@Type@Value values[] = {" \
--vprod " { @VALUENAME@, \"@VALUENAME@\", \"@valuenick@\" }," \
--vtail " { 0, NULL, NULL }\n };\n etype = g_@type@_register_static (\"@EnumName@\", values);\n }\n return etype;\n}\n" \
$(parole_glib_enum_headers) ) >> xgen-enum.c \
&& cp xgen-enum.c enum-gtypes.c \
&& rm -f xgen-enum.c
org.parole.media.list.h: $(srcdir)/org.parole.media.list.xml
dbus-binding-tool --mode=glib-server --prefix=parole_media_list $< >$@
org.parole.media.player.h: $(srcdir)/org.parole.media.player.xml
dbus-binding-tool --mode=glib-server --prefix=parole_player $< >$@
endif
EXTRA_DIST = \
gmarshal.list \
org.parole.media.player.xml \
org.parole.media.list.xml
DISTCLEANFILES = \
$(BUILT_SOURCES) \
stamp-enum-gtypes.h
Help is appreciated, especially a step by step to get a grasp of what I may have omitted or done wrong!
As you can see I'm just shooting blindly at anything I can think of in trying to figure out the process. I did read docs, but most refer to using meson, or if about Parole, compiling a newer version of Parole, or I lack the last bit of information for me to get it and then there's also very "none"-answers situations (think "why would you even do that").
As a reminder, I'm on Xubuntu 24.04, xfce4.18, all software is up to date (if that matters).
Note:
The last time I compiled C software on Xubuntu was on 16.04 I think, which was a regression of GIMP after they introduced the top image tab being visible by default, so feel free to explain the process like I'm 5, I'm not going to be mad being treated like an idiot because I sure don't remember much other than "go into directory, make, wait, done", but clearly it's either not that easy if I fail at doing just that, or I'm not seeing the obvious. 
PS: Very dumb question, but it's not possible to just use the parole binary from /bin/ of an older OS version, is it? I rather ask this before I try stupid stuff and mess something up.
Last edited by Sly_Mk3 (2026-06-26 13:07:52)
