You are not logged in.
Pages: 1
Hi,
Do you know a script who's doing like Nautilus-resize-image but for Thunar. I looked already on the web, but I didn't find anything who's running . Imagemagick and zenity are installed on my fedora.
For the scripts I try,I put them in a folder named script ( /home/script) and named them resize.sh. Then I create a custom action (in the "edit" menu of thunar). I enter /home/.../script/resize.sh f% as a command (actually, I dont know if %f is better than %F for that kind of script).
Can I modify the Nautilus-resize-image's script to use it in Thunar? What changes must i do?
Offline
Can I modify the Nautilus-resize-image's script to use it in Thunar? What changes must i do?
Perhaps you could post the Nautilus script for those who don't use Nautilus, if you'd like some input. Or, have a look at the resize images script and thunar action at this site - it also uses zenity and imagemagick.
EDIT: Okay, it's not a script but actually a nautilus extension: https://git.gnome.org/browse/nautilus-i … r/tree/src. This won't work in Thunar unless someone ports it over. If you're looking at just having a thunar custom action to resize images, have a look at the link I posted above.
Last edited by ToZ (2015-06-20 17:46:29)
Please remember to mark your thread [SOLVED] to make it easier for others to find
--- How To Ask For Help | FAQ | Developer Wiki | Community | Contribute ---
Offline
Ok, here's the script :
#!/bin/bash
# paths, constants, etc.
PICPATH="$1"
TOTALPICS="$((($# - 1)))"
STEP="$(((100 / $TOTALPICS)))"
PROGR=0
MINSIZE=1
MAXSIZE=1000
# Check if ImageMagick commands are found
for command in convert identify
do
if [ ! $(which $command) ]
then
zenity --error --text "Could not find \"$command\" application.\n
Make sure ImageMagick is installed and \"$command\" is executable."
exit 1
fi
done
# get the new size percentage, check it and set output directory path
SIZE=""
while [ -z "$SIZE" ] || [[ $SIZE -gt $MAXSIZE ]]; do
SIZE="$(zenity --entry --title="Picture Resize" --text="Enter percentage...")"
# exit if cancel pressed
[[ $? != 0 ]] && exit 0
# check range
if [[ $SIZE -gt $MAXSIZE ]]; then
zenity --error --text="$SIZE% is outside the accepted range: 1% - 1000%!"
fi
done
# convert pics, show progress bar
while (( $# )); do
convert "$PICPATH/$1" -resize "$SIZE%" -quality 95 -interlace line "$SIZE%-$1"
((PROGR+=$STEP))
echo $PROGR
shift
done | zenity --progress --title="Picture Resize" --text="working..." --percentage=0 --auto-close
# check return value and print message depending on it
[[ $? == 0 ]] && zenity --info --title="Picture Resize" --text="All done!"|| zenity -
-error --text="Canceled!"
I try the script given on the website. It doesn't work for :
any value I give to percentage, I have an error message : "...% is outside the accepted range"
Do you know what's wrong on this script?
Last edited by tryphon69 (2015-06-23 11:53:38)
Offline
I try the script given on the website. It doesn't work for :
any value I give to percentage, I have an error message : "...% is outside the accepted range"
Do you know what's wrong on this script?
Yeah, just had a look. There is an error in the script. Try this version:
#!/bin/bash
# paths, constants, etc.
PICPATH="$1"
TOTALPICS="$((($# - 1)))"
STEP="$(((100 / $TOTALPICS)))"
PROGR=0
MINSIZE=1
MAXSIZE=1000
# get the new size percentage, check it and set output directory path
SIZE=""
while [ -z "$SIZE" ] || [[ $SIZE -gt $MAXSIZE ]]; do
SIZE="$(zenity --entry --title="Picture Resize" --text="Enter percentage...")"
# exit if cancel pressed
[[ $? != 0 ]] && exit 0
# check range
if [[ $SIZE -gt $MAXSIZE ]]; then
zenity --error --text="$SIZE% is outside the accepted range: 1% - 1000%!"
fi
done
OUTPATH="resize_$SIZE%"
# check if output directory exists
[ -d "$PICPATH/$OUTPATH" ] || mkdir "$PICPATH/$OUTPATH"
shift
# convert pics, show progress bar
while (( $# )); do
convert "$PICPATH/$1" -resize "$SIZE%" "$PICPATH/$OUTPATH/resized_$SIZE%-$1"
((PROGR+=$STEP))
echo $PROGR
shift
done | zenity --progress --title="Picture Resize" --text="working..." --percentage=0 -
-auto-close
# check return value and print message depending on it
[[ $? == 0 ]] && zenity --info --title="Picture Resize" --text="All done!" || zenity -
-error --text="Canceled!"
Please remember to mark your thread [SOLVED] to make it easier for others to find
--- How To Ask For Help | FAQ | Developer Wiki | Community | Contribute ---
Offline
Thank you, works fine. I just change the script a little, to have the name like : x%-name and without a new folder
Offline
I'm now looking to resize a picture with the size (not percentage). I try to modify the script above but I have troubles. Here's the script I try :
#!/bin/bash
# paths, constants, etc.
PICPATH="$1"
TOTALPICS="$((($# - 1)))"
STEP="$(((100 / $TOTALPICS)))"
PROGR=0
MINSIZE=12
MAXSIZE=2048
# Check if ImageMagick commands are found
for command in convert identify
do
if [ ! $(which $command) ]
then
zenity --error --text "Could not find \"$command\" application.\n
Make sure ImageMagick is installed and \"$command\" is executable."
exit 1
fi
done
# get the new size, check it and set output directory path
SIZE=""
while [ -z "$SIZE" ] || [[ $SIZE -gt $MAXSIZE ]] || [[ $SIZE -gt $MINSIZE ]]; do
SIZE="$(zenity --entry --title="Picture Resize" --text="Enter maximum size...")"
# exit if cancel pressed
[[ $? != 0 ]] && exit 0
# check range max
if [[ $SIZE -gt $MAXSIZE ]]; then
zenity --error --text="$SIZE"px" is outside the accepted range: 12px - 2048px!"
fi
done
# check range min
if [[ $SIZE -gt $MAXSIZE ]]; then
zenity --error --text="$SIZE"px" is outside the accepted range: 12px - 2048px!"
fi
done
# convert pics, show progress bar
while (( $# )); do
convert "$PICPATH/$1" -resize "$SIZE" -quality 95 -interlace line "$SIZE"px"-$1"
((PROGR+=$STEP))
echo $PROGR
shift
done | zenity --progress --title="Picture Resize" --text="working..." --percentage=0 --auto-close
# check return value and print message depending on it
[[ $? == 0 ]] && zenity --info --title="Picture Resize" --text="All done!" || zenity -
-error --text="Canceled!"
My problems :
- the script doesn't work (when I enter a value, ce script asks me again to enter a value)
- When I enter a size smaller than 12px, the script halts (I have the error message for a bigger size, these part work)
-If I select more than one picture, I don't have these custom action, even if it works with the script above.
Offline
You have a few problems with that script:
1. The first while script has 2 done statements.
2. If the size isn't fitting within the parameters, you're not resetting the SIZE string
3. You should move the gt/lt size checks later and reset size if its not in the range.
Try this version:
#!/bin/bash
# paths, constants, etc.
PICPATH="$1"
TOTALPICS="$((($# - 1)))"
STEP="$(((100 / $TOTALPICS)))"
PROGR=0
MINSIZE=12
MAXSIZE=2048
# Check if ImageMagick commands are found
for command in convert identify
do
if [ ! $(which $command) ]
then
zenity --error --text "Could not find \"$command\" application.\n
Make sure ImageMagick is installed and \"$command\" is executable."
exit 1
fi
done
# get the new size and check it
SIZE=""
while [ -z "$SIZE" ]; do
SIZE="$(zenity --entry --title="Picture Resize" --text="Enter maximum size...")"
# exit if cancel pressed
[[ $? != 0 ]] && exit 0
# check range
if [[ $SIZE -lt $MINSIZE ]] || [[ $SIZE -gt $MAXSIZE ]]; then
zenity --error --text="$SIZE"px" is outside the accepted range: 12px - 2048px!"
SIZE=""
fi
done
# convert pics, show progress bar
while (( $# )); do
convert "$PICPATH/$1" -resize "$SIZE" -quality 95 -interlace line "$SIZE"px"-$1"
((PROGR+=$STEP))
echo $PROGR
shift
done | zenity --progress --title="Picture Resize" --text="working..." --percentage=0 --auto-close
# check return value and print message depending on it
[[ $? == 0 ]] && zenity --info --title="Picture Resize" --text="All done!" || zenity -
-error --text="Canceled!"
Also, if your entered size value is the width of the new image, you should probably change the phrasing of the first dialog from "Enter maximum size..." to something more descriptive of what you're doing, like: "Enter new width (12-2048px) - aspect ratio will be maintained..."
Last edited by ToZ (2015-06-23 14:08:51)
Please remember to mark your thread [SOLVED] to make it easier for others to find
--- How To Ask For Help | FAQ | Developer Wiki | Community | Contribute ---
Offline
The second part of the script (checking the width range) is ok, it works well. I change the description of this part :
# Enter new width (12px-2048px) and check it - aspect ratio will be maintained...
The third part (converting picts), still not working :
- The script is running (I have the "All done text" with zenity), but the new picture is not created.
And I still have this problem : when I select more than one picture, the custom action does not appear on the right-click menu.
Offline
In the custom action, make sure the command is set to:
/path/to/script %d %N
...where "/path/to/script" is the path and name of the script you created.
- %d = passes the directory name
- %N = passes the file names
Please remember to mark your thread [SOLVED] to make it easier for others to find
--- How To Ask For Help | FAQ | Developer Wiki | Community | Contribute ---
Offline
Ok, it's working well. I had to log out once and then it work.
Here's the final script :
#!/bin/bash
# paths, constants, etc.
PICPATH="$1"
TOTALPICS="$((($# - 1)))"
STEP="$(((100 / $TOTALPICS)))"
PROGR=0
MINSIZE=12
MAXSIZE=2048
# Check if ImageMagick commands are found
for command in convert identify
do
if [ ! $(which $command) ]
then
zenity --error --text "Could not find \"$command\" application.\n
Make sure ImageMagick is installed and \"$command\" is executable."
exit 1
fi
done
# Enter new width (12px-2048px) and check it - aspect ratio will be maintained...
SIZE=""
while [ -z "$SIZE" ]; do
SIZE="$(zenity --entry --title="Picture Resize" --text="Enter maximum width...")"
# exit if cancel pressed
[[ $? != 0 ]] && exit 0
# check range
if [[ $SIZE -lt $MINSIZE ]] || [[ $SIZE -gt $MAXSIZE ]]; then
zenity --error --text="$SIZE"px" is outside the accepted range: 12px - 2048px!"
SIZE=""
fi
done
# convert pics
while (( $# )); do
convert "$PICPATH/$1" -resize "$SIZE" -quality 95 -interlace line "$SIZE"px"-$1"
((PROGR+=$STEP))
echo $PROGR
shift
#show progress bar
done | zenity --progress --title="Picture Resize" --text="working..." --percentage=0 --auto-close
# check return value and print message depending on it
[[ $? == 0 ]] && zenity --info --title="Picture Resize" --text="All done!" || zenity -
-error --text="Canceled!"
Thank you very much!
Offline
Pages: 1
[ Generated in 0.010 seconds, 7 queries executed - Memory usage: 598.19 KiB (Peak: 615.03 KiB) ]