Xfce Forum

Sub domains
 

You are not logged in.

Pages: 1

#1 2016-04-20 16:28:01

Egoadsr
Member
Registered: 2016-04-20
Posts: 6

Xfce display manager show wrong display modes

Hi there,

I've been looking on the net for my problem, but i couldn't find something up to date to resolve my problem.

I have an HP-mini, with Xubuntu installed, everything run fine, but there is a little problem with the display modes...

In the display manager there is a lot of display mode with a refresh rate of 120Hz ( the default 1024*600 is only 60hz wich is good, but all of the others mode set by default my screen to 120Hz when i switch to another mode ), but my laptop screen don't support this rate.

Is there a way to remove a display mode in the display manager, or remove a refresh rate for all the resolution ?

When i use xrandr, there is no mode with 120Hz... Can i tell the display manager to copy the settings from xrandr ?

Edit : When i switch to for ex. : 640*480 120Hz, the screen is like cutted in half vertically, and when i xrandr is this mode the * of the actual refresh rate is near 60Hz...

Last edited by Egoadsr (2016-04-20 16:31:53)

Offline

#2 2016-04-20 23:29:14

ToZ
Administrator
From: Canada
Registered: 2011-06-02
Posts: 11,493

Re: Xfce display manager show wrong display modes

Hello and welcome.

Egoadsr wrote:

Is there a way to remove a display mode in the display manager, or remove a refresh rate for all the resolution ?

When i use xrandr, there is no mode with 120Hz... Can i tell the display manager to copy the settings from xrandr ?

While not logged in, rename the ~/.config/xfce4/xfconf/xfce-perchannel-xml/displays.xml file. It will be re-created on the next log in and hopefully get the correct xrandr modes.

Can also post back the exact results of the "xrandr" command?

Please remember to mark your thread [SOLVED] to make it easier for others to find
--- How To Ask For Help | FAQ | Developer Wiki  |  Community | Contribute ---

Offline

#3 2016-04-21 16:10:40

Egoadsr
Member
Registered: 2016-04-20
Posts: 6

Re: Xfce display manager show wrong display modes

Thanks for your help ToZ smile

So, i've logged out my Xfce session, Crtl-Alt-F1 to switch to console mode, renamed displays.xml, rebooted, logged in, and crossed my finger.

When xfce started, the file displays.xml wasn't here.

I've launched the Xfce display manager, the file displays.xml is born again, but the 120Hz modes are still here.

Here is the xrandr output :

Screen 0: minimum 320 x 200, current 1024 x 600, maximum 4096 x 4096
VGA-0 disconnected (normal left inverted right x axis y axis)
LVDS-0 connected 1024x600+0+0 (normal left inverted right x axis y axis) 223mm x 125mm
   1024x600      60.02*+
   960x600       60.00 
   960x540       59.99 
   800x600       60.00    60.32    56.25 
   840x525       60.01    59.88 
   800x512       60.17 
   700x525       59.98 
   640x512       60.02 
   720x450       59.89 
   640x480       60.00    59.94 
   680x384       59.80    59.96 
   576x432       60.06 
   512x384       60.00 
   400x300       60.32    56.34 
   320x240       60.05

For information, i have a HP mini200-4210sf, with an intel GMA3600 graphic card, i remember that it's a nightmare to find a driver using the hardware acceleration, i was happy when i've seen Xfce running videos ( in firefox ) with the hardware acceleration, actuelly it almost work like it has to do, and i didn't go to deep in the video driver subject. So maybe it's a video card issue

Last edited by Egoadsr (2016-04-21 16:22:34)

Offline

#4 2016-04-21 16:53:44

ToZ
Administrator
From: Canada
Registered: 2011-06-02
Posts: 11,493

Re: Xfce display manager show wrong display modes

Which version of Xfce are you using?

Can you post back the contents of your Xorg.0.log file?

Please remember to mark your thread [SOLVED] to make it easier for others to find
--- How To Ask For Help | FAQ | Developer Wiki  |  Community | Contribute ---

Offline

#5 2016-04-22 09:55:22

Egoadsr
Member
Registered: 2016-04-20
Posts: 6

Re: Xfce display manager show wrong display modes

I'm using Xfce 4.12 distributed by Xubuntu.

Here is the log file :

[    45.065]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[    45.065] X Protocol Version 11, Revision 0
[    45.066] Build Operating System: Linux 3.13.0-68-generic i686 Ubuntu
[    45.066] Current Operating System: Linux Meliko-Mini 4.2.0-35-generic #40-Ubuntu SMP Tue Mar 15 19:53:28 UTC 2016 i686
[    45.066] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-35-generic root=UUID=bc3ec60b-9c77-4cc4-90f2-43f9d2d1aaef ro quiet splash vt.handoff=7
[    45.066] Build Date: 12 November 2015  05:33:32PM
[    45.066] xorg-server 2:1.17.2-1ubuntu9.1 (For technical support please see http://www.ubuntu.com/support)
[    45.066] Current version of pixman: 0.32.6
[    45.066]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    45.066] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    45.067] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 21 17:50:56 2016
[    45.087] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    45.088] (==) No Layout section.  Using the first Screen section.
[    45.088] (==) No screen section available. Using defaults.
[    45.089] (**) |-->Screen "Default Screen Section" (0)
[    45.089] (**) |   |-->Monitor "<default monitor>"
[    45.089] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    45.089] (==) Automatically adding devices
[    45.089] (==) Automatically enabling devices
[    45.089] (==) Automatically adding GPU devices
[    45.090] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    45.090]     Entry deleted from font path.
[    45.090] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    45.090]     Entry deleted from font path.
[    45.090] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    45.090]     Entry deleted from font path.
[    45.090] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    45.090]     Entry deleted from font path.
[    45.090] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    45.090]     Entry deleted from font path.
[    45.090] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    45.090] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    45.090] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    45.090] (II) Loader magic: 0x802f26c0
[    45.090] (II) Module ABI versions:
[    45.090]     X.Org ANSI C Emulation: 0.4
[    45.091]     X.Org Video Driver: 19.0
[    45.091]     X.Org XInput driver : 21.0
[    45.091]     X.Org Server Extension : 9.0
[    45.093] (II) xfree86: Adding drm device (/dev/dri/card0)
[    45.098] (--) PCI:*(0:0:2:0) 8086:0be1:103c:338d rev 9, Mem @ 0x44000000/1048576, I/O @ 0x000040d0/8
[    45.098] (II) LoadModule: "glx"
[    45.111] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    45.331] (II) Module glx: vendor="X.Org Foundation"
[    45.331]     compiled for 1.17.2, module version = 1.0.0
[    45.331]     ABI class: X.Org Server Extension, version 9.0
[    45.331] (==) AIGLX enabled
[    45.331] (==) Matched modesetting as autoconfigured driver 0
[    45.331] (==) Matched fbdev as autoconfigured driver 1
[    45.331] (==) Matched vesa as autoconfigured driver 2
[    45.332] (==) Assigned the driver to the xf86ConfigLayout
[    45.332] (II) LoadModule: "modesetting"
[    45.333] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    45.333] (II) Module modesetting: vendor="X.Org Foundation"
[    45.333]     compiled for 1.17.2, module version = 1.17.2
[    45.333]     Module class: X.Org Video Driver
[    45.333]     ABI class: X.Org Video Driver, version 19.0
[    45.333] (II) LoadModule: "fbdev"
[    45.334] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    45.334] (II) Module fbdev: vendor="X.Org Foundation"
[    45.335]     compiled for 1.17.1, module version = 0.4.4
[    45.335]     Module class: X.Org Video Driver
[    45.335]     ABI class: X.Org Video Driver, version 19.0
[    45.335] (II) LoadModule: "vesa"
[    45.336] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    45.336] (II) Module vesa: vendor="X.Org Foundation"
[    45.336]     compiled for 1.17.1, module version = 2.3.4
[    45.336]     Module class: X.Org Video Driver
[    45.336]     ABI class: X.Org Video Driver, version 19.0
[    45.336] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    45.336] (II) FBDEV: driver for framebuffer: fbdev
[    45.337] (II) VESA: driver for VESA chipsets: vesa
[    45.337] (++) using VT number 7

[    45.337] (II) modeset(0): using drv /dev/dri/card0
[    45.337] (WW) Falling back to old probe method for fbdev
[    45.337] (II) Loading sub module "fbdevhw"
[    45.337] (II) LoadModule: "fbdevhw"
[    45.338] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    45.339] (II) Module fbdevhw: vendor="X.Org Foundation"
[    45.339]     compiled for 1.17.2, module version = 0.0.2
[    45.339]     ABI class: X.Org Video Driver, version 19.0
[    45.339] (WW) Falling back to old probe method for vesa
[    45.339] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    45.340] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    45.340] (==) modeset(0): RGB weight 888
[    45.340] (==) modeset(0): Default visual is TrueColor
[    45.340] (II) Loading sub module "glamoregl"
[    45.340] (II) LoadModule: "glamoregl"
[    45.341] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    45.564] (II) Module glamoregl: vendor="X.Org Foundation"
[    45.564]     compiled for 1.17.2, module version = 1.0.0
[    45.564]     ABI class: X.Org ANSI C Emulation, version 0.4
[    45.564] (II) glamor: OpenGL accelerated X.org driver based.
[    45.840] (II) glamor: EGL version 1.4 (DRI2):
[    45.840] EGL_MESA_drm_image required.
[    45.840] (EE) modeset(0): glamor initialization failed
[    45.841] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[    45.872] (II) modeset(0): Output VGA-0 has no monitor section
[    45.936] (II) modeset(0): Output LVDS-0 has no monitor section
[    45.968] (II) modeset(0): EDID for output VGA-0
[    46.032] (II) modeset(0): EDID for output LVDS-0
[    46.032] (II) modeset(0): Manufacturer: AUO  Model: 31d2  Serial#: 0
[    46.032] (II) modeset(0): Year: 2008  Week: 1
[    46.032] (II) modeset(0): EDID Version: 1.3
[    46.032] (II) modeset(0): Digital Display Input
[    46.032] (II) modeset(0): Max Image Size [cm]: horiz.: 22  vert.: 13
[    46.032] (II) modeset(0): Gamma: 2.20
[    46.032] (II) modeset(0): No DPMS capabilities specified
[    46.032] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    46.032] (II) modeset(0): First detailed timing is preferred mode
[    46.032] (II) modeset(0): redX: 0.588 redY: 0.351   greenX: 0.342 greenY: 0.567
[    46.032] (II) modeset(0): blueX: 0.158 blueY: 0.123   whiteX: 0.313 whiteY: 0.329
[    46.032] (II) modeset(0): Manufacturer's mask: 0
[    46.032] (II) modeset(0): Supported detailed timing:
[    46.032] (II) modeset(0): clock: 54.2 MHz   Image Size:  223 x 125 mm
[    46.032] (II) modeset(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1438 h_border: 0
[    46.032] (II) modeset(0): v_active: 600  v_sync: 603  v_sync_end 604 v_blanking: 628 v_border: 0
[    46.033] (II) modeset(0): Unknown vendor-specific block f
[    46.033] (II) modeset(0):  AUO
[    46.033] (II) modeset(0):  B101AW03 V1
[    46.033] (II) modeset(0): EDID (in hex):
[    46.033] (II) modeset(0):     00ffffffffffff0006afd23100000000
[    46.033] (II) modeset(0):     0112010380160d780ab9a59659579128
[    46.033] (II) modeset(0):     1f505400000001010101010101010101
[    46.033] (II) modeset(0):     0101010101012c15009e41581c201888
[    46.033] (II) modeset(0):     3100df7d000000180000000f00000000
[    46.033] (II) modeset(0):     00000000000000000020000000fe0041
[    46.033] (II) modeset(0):     554f0a202020202020202020000000fe
[    46.033] (II) modeset(0):     004231303141573033205631200a000f
[    46.033] (II) modeset(0): Printing probed modes for output LVDS-0
[    46.034] (II) modeset(0): Modeline "1024x600"x60.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    46.034] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    46.034] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    46.034] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    46.034] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    46.034] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    46.034] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    46.034] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    46.034] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    46.034] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    46.034] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    46.034] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    46.034] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    46.034] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    46.034] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    46.034] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    46.034] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    46.034] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    46.034] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    46.034] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    46.035] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    46.035] (II) modeset(0): Output VGA-0 disconnected
[    46.035] (II) modeset(0): Output LVDS-0 connected
[    46.035] (II) modeset(0): Using exact sizes for initial modes
[    46.035] (II) modeset(0): Output LVDS-0 using initial mode 1024x600
[    46.035] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    46.035] (==) modeset(0): DPI set to (96, 96)
[    46.035] (II) Loading sub module "fb"
[    46.035] (II) LoadModule: "fb"
[    46.036] (II) Loading /usr/lib/xorg/modules/libfb.so
[    46.036] (II) Module fb: vendor="X.Org Foundation"
[    46.036]     compiled for 1.17.2, module version = 1.0.0
[    46.036]     ABI class: X.Org ANSI C Emulation, version 0.4
[    46.036] (II) UnloadModule: "fbdev"
[    46.036] (II) Unloading fbdev
[    46.036] (II) UnloadSubModule: "fbdevhw"
[    46.036] (II) Unloading fbdevhw
[    46.037] (II) UnloadModule: "vesa"
[    46.037] (II) Unloading vesa
[    46.037] (==) Depth 24 pixmap format is 32 bpp
[    46.037] (==) modeset(0): Backing store enabled
[    46.037] (==) modeset(0): Silken mouse enabled
[    46.037] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    46.038] (==) modeset(0): DPMS enabled
[    46.124] (--) RandR disabled
[    46.147] (II) SELinux: Disabled on system
[    46.150] (II) AIGLX: Screen 0 is not DRI2 capable
[    46.150] (EE) AIGLX: reverting to software rendering
[    46.154] (II) AIGLX: Loaded and initialized swrast
[    46.154] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    46.235] (II) modeset(0): Setting screen physical size to 270 x 158
[    46.314] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    46.363] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    46.363] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    46.363] (II) LoadModule: "evdev"
[    46.364] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    46.401] (II) Module evdev: vendor="X.Org Foundation"
[    46.401]     compiled for 1.17.1, module version = 2.9.2
[    46.401]     Module class: X.Org XInput Driver
[    46.401]     ABI class: X.Org XInput driver, version 21.0
[    46.401] (II) Using input driver 'evdev' for 'Power Button'
[    46.401] (**) Power Button: always reports core events
[    46.401] (**) evdev: Power Button: Device: "/dev/input/event2"
[    46.402] (--) evdev: Power Button: Vendor 0 Product 0x1
[    46.402] (--) evdev: Power Button: Found keys
[    46.402] (II) evdev: Power Button: Configuring as keyboard
[    46.402] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    46.402] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    46.402] (**) Option "xkb_rules" "evdev"
[    46.403] (**) Option "xkb_model" "pc105"
[    46.403] (**) Option "xkb_layout" "fr"
[    46.410] (II) XKB: reuse xkmfile /var/lib/xkb/server-1CA37FD61409D6C1EDB80880DF2DB1A574556A6A.xkm
[    46.414] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    46.414] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    46.414] (II) Using input driver 'evdev' for 'Video Bus'
[    46.414] (**) Video Bus: always reports core events
[    46.414] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    46.414] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    46.414] (--) evdev: Video Bus: Found keys
[    46.415] (II) evdev: Video Bus: Configuring as keyboard
[    46.415] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event4"
[    46.415] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    46.415] (**) Option "xkb_rules" "evdev"
[    46.415] (**) Option "xkb_model" "pc105"
[    46.415] (**) Option "xkb_layout" "fr"
[    46.417] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    46.417] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    46.417] (II) Using input driver 'evdev' for 'Power Button'
[    46.417] (**) Power Button: always reports core events
[    46.418] (**) evdev: Power Button: Device: "/dev/input/event1"
[    46.418] (--) evdev: Power Button: Vendor 0 Product 0x1
[    46.418] (--) evdev: Power Button: Found keys
[    46.418] (II) evdev: Power Button: Configuring as keyboard
[    46.418] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    46.418] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    46.418] (**) Option "xkb_rules" "evdev"
[    46.418] (**) Option "xkb_model" "pc105"
[    46.418] (**) Option "xkb_layout" "fr"
[    46.420] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    46.421] (II) No input driver specified, ignoring this device.
[    46.421] (II) This device may have been added with another device file.
[    46.423] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[    46.423] (II) No input driver specified, ignoring this device.
[    46.423] (II) This device may have been added with another device file.
[    46.424] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[    46.424] (II) No input driver specified, ignoring this device.
[    46.424] (II) This device may have been added with another device file.
[    46.426] (II) config/udev: Adding input device HP Webcam-50 (/dev/input/event7)
[    46.426] (**) HP Webcam-50: Applying InputClass "evdev keyboard catchall"
[    46.426] (II) Using input driver 'evdev' for 'HP Webcam-50'
[    46.426] (**) HP Webcam-50: always reports core events
[    46.426] (**) evdev: HP Webcam-50: Device: "/dev/input/event7"
[    46.427] (--) evdev: HP Webcam-50: Vendor 0x58f Product 0xa002
[    46.427] (--) evdev: HP Webcam-50: Found keys
[    46.427] (II) evdev: HP Webcam-50: Configuring as keyboard
[    46.427] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8/event7"
[    46.427] (II) XINPUT: Adding extended input device "HP Webcam-50" (type: KEYBOARD, id 9)
[    46.427] (**) Option "xkb_rules" "evdev"
[    46.427] (**) Option "xkb_model" "pc105"
[    46.427] (**) Option "xkb_layout" "fr"
[    46.430] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    46.430] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    46.430] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    46.430] (**) AT Translated Set 2 keyboard: always reports core events
[    46.430] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    46.430] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    46.430] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    46.430] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    46.430] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    46.430] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    46.430] (**) Option "xkb_rules" "evdev"
[    46.430] (**) Option "xkb_model" "pc105"
[    46.430] (**) Option "xkb_layout" "fr"
[    46.433] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[    46.433] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    46.433] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    46.433] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    46.433] (II) LoadModule: "synaptics"
[    46.434] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    46.434] (II) Module synaptics: vendor="X.Org Foundation"
[    46.434]     compiled for 1.17.1, module version = 1.8.2
[    46.434]     Module class: X.Org XInput Driver
[    46.434]     ABI class: X.Org XInput driver, version 21.0
[    46.434] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    46.434] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    46.435] (**) Option "Device" "/dev/input/event5"
[    46.484] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    46.484] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 60)
[    46.484] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5888 (res 157)
[    46.485] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    46.485] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    46.485] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    46.485] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    46.485] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    46.485] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    46.512] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[    46.512] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    46.512] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    46.512] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    46.512] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.032
[    46.513] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    46.513] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    46.513] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    46.513] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    46.514] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    46.516] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    46.516] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    46.525] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[    46.526] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    46.526] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    46.526] (**) HP WMI hotkeys: always reports core events
[    46.526] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[    46.526] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    46.526] (--) evdev: HP WMI hotkeys: Found keys
[    46.526] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    46.526] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[    46.526] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[    46.526] (**) Option "xkb_rules" "evdev"
[    46.526] (**) Option "xkb_model" "pc105"
[    46.526] (**) Option "xkb_layout" "fr"
[    66.996] (II) modeset(0): EDID vendor "AUO", prod id 12754
[    66.996] (II) modeset(0): Printing DDC gathered Modelines:
[    66.996] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    67.340] (II) modeset(0): EDID vendor "AUO", prod id 12754
[    67.340] (II) modeset(0): Printing DDC gathered Modelines:
[    67.340] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    70.032] (II) modeset(0): EDID vendor "AUO", prod id 12754
[    70.032] (II) modeset(0): Printing DDC gathered Modelines:
[    70.032] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    70.128] (II) modeset(0): EDID vendor "AUO", prod id 12754
[    70.128] (II) modeset(0): Printing DDC gathered Modelines:
[    70.128] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[   139.148] (II) modeset(0): EDID vendor "AUO", prod id 12754
[   139.148] (II) modeset(0): Printing DDC gathered Modelines:
[   139.148] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[   176.560] (II) modeset(0): EDID vendor "AUO", prod id 12754
[   176.560] (II) modeset(0): Printing DDC gathered Modelines:
[   176.560] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  1022.060] (II) modeset(0): EDID vendor "AUO", prod id 12754
[  1022.060] (II) modeset(0): Printing DDC gathered Modelines:
[  1022.060] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  1985.168] (II) modeset(0): EDID vendor "AUO", prod id 12754
[  1985.168] (II) modeset(0): Printing DDC gathered Modelines:
[  1985.168] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  1985.268] (II) modeset(0): EDID vendor "AUO", prod id 12754
[  1985.268] (II) modeset(0): Printing DDC gathered Modelines:
[  1985.268] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  1985.372] (II) modeset(0): EDID vendor "AUO", prod id 12754
[  1985.372] (II) modeset(0): Printing DDC gathered Modelines:
[  1985.372] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  1985.568] (II) modeset(0): EDID vendor "AUO", prod id 12754
[  1985.568] (II) modeset(0): Printing DDC gathered Modelines:
[  1985.568] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[ 10630.148] (II) modeset(0): EDID vendor "AUO", prod id 12754
[ 10630.148] (II) modeset(0): Printing DDC gathered Modelines:
[ 10630.148] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[ 10630.158] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10632.312] (II) modeset(0): EDID vendor "AUO", prod id 12754
[ 10632.312] (II) modeset(0): Printing DDC gathered Modelines:
[ 10632.312] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[ 10632.456] (II) modeset(0): EDID vendor "AUO", prod id 12754
[ 10632.456] (II) modeset(0): Printing DDC gathered Modelines:
[ 10632.456] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[ 10632.568] (II) modeset(0): EDID vendor "AUO", prod id 12754
[ 10632.568] (II) modeset(0): Printing DDC gathered Modelines:
[ 10632.568] (II) modeset(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)

Effectively we can see strange modes after 46s... it seem to have something to do with the doublescan attribute...
I know a little about programming but concerning the kernel i'm a bit confused smile

Offline

#6 2016-04-22 13:25:09

ToZ
Administrator
From: Canada
Registered: 2011-06-02
Posts: 11,493

Re: Xfce display manager show wrong display modes

Xfce is just using the resolutions and refresh rates that are being exposed by X. As you can see by your Xorg log file, and you've rightly identified, doublescan seems to be causing these errant refresh rates. Unfortunately, I'm not sure I can help you with that.

One other question: I notice you are using the modesetting driver in X. Is this by choice? Which video card(s) do you have and have you tried using the proprietary drivers?

Please remember to mark your thread [SOLVED] to make it easier for others to find
--- How To Ask For Help | FAQ | Developer Wiki  |  Community | Contribute ---

Offline

#7 2016-04-22 18:51:30

sixsixfive
Member
From: behind you
Registered: 2012-04-08
Posts: 579
Website

Re: Xfce display manager show wrong display modes

as toz already mentioned your x server will use your edid informations, however you can disable this feature and add manual modelines/preferredmodes to your xorg.conf(there is a tool called "cvt" that will help you to find the correct modelines)


see also:

https://forums.gentoo.org/viewtopic-p-7 … ml#7501690
https://wiki.ubuntu.com/X/Config/Resolu … _xorg.conf

A monotone icon theme for Xfce
A dark theme for Xfce

Offline

#8 2016-04-23 09:47:52

Egoadsr
Member
Registered: 2016-04-20
Posts: 6

Re: Xfce display manager show wrong display modes

ToZ wrote:

One other question: I notice you are using the modesetting driver in X. Is this by choice? Which video card(s) do you have and have you tried using the proprietary drivers?

As i said some post above, i have a GMA 3600, and at the period where i installed linuxon that PC, the only way to have a basic hardware accelaration was to use modesetting like describe here : https://wiki.archlinux.org/index.php/Intel_GMA3600?html maybe actually there is a descend proprietary driver... But it's not my everyday PC, so i didn't give me headaches with this, actually my system handle a video hardware acceleration and a simple OpenGL support, wich is quite enough for me to develop small application and learn more about programming.

however you can disable this feature and add manual modelines/preferredmodes to your xorg.conf(there is a tool called "cvt" that will help you to find the correct modelines)

Yes i know that smile, but it's a pain to create this file... it's a long time problem, it's not very annoying, if  i know i'll use low resolution fullscreen, i switch to this mode before launching app. If i have the time and the patience to make it i will... for now, i stay with that.

Thanks for your answers wink

Offline

#9 2016-04-23 10:30:15

sixsixfive
Member
From: behind you
Registered: 2012-04-08
Posts: 579
Website

Re: Xfce display manager show wrong display modes

Egoadsr wrote:

but it's a pain to create this file... it's a long time problem

and the problem will persist, since its the fault of your Display Vendor that included a faulty EDID table to your monitor, also you should be happy that you can change it easily by editing the xorg config because on some other operating systems you have to live with it.

A monotone icon theme for Xfce
A dark theme for Xfce

Offline

#10 2016-04-24 12:46:24

Egoadsr
Member
Registered: 2016-04-20
Posts: 6

Re: Xfce display manager show wrong display modes

sixsixfive wrote:

and the problem will persist, since its the fault of your Display Vendor that included a faulty EDID table to your monitor, also you should be happy that you can change it easily by editing the xorg config because on some other operating systems you have to live with it.

Effectively it's not a big problem, and i've found this Hp-mini in a trash, so i didn't ask him to much.

What OS did you think about ?

Offline

#11 2016-04-25 21:10:46

ryu
Member
Registered: 2016-04-25
Posts: 2

Re: Xfce display manager show wrong display modes

Hi

I'm coming here with a similar issue, so I'm posting here instead of opening another thread. i hope that's fine.

Xfce4.10 ran perfectly fine when I freshly installed it a few hours ago on my dual monitor setup. Then I added a third monitor, thing went still smooth. But when I turned of my other monitors things went haywire.

With some fiddling I got the correct pictures back to my two desktop monitors at their respective resolutions w/o mirroring or anything.

However I'm now getting a lot of screen tearing on my primary monitor. I've tried deinstalling and reinstalling Xfce, which did not reset any of my settings nor the monitor issue. Adding .xprofile to my home directory didn't help either. In fact, this line

xrandr --output DVI-D-0 --mode 1920x1200 --rate 60

Does nothing, while I'm sure that the issue is that my primary monitor's refresh rate is not set correctly.

At the very least, what I can do to properly deinstall Xfce so I can reset whatever wrong configuration has shown up here? Since it was working fine before...

Thanks in advance!

edit: Oh yeah, I'm running Debian 8 and used Gnome before installing xfce. Everything works as intended when I switch back to gnome so I'm sure this has to be fixable somehow!

Last edited by ryu (2016-04-25 21:26:37)

Offline

#12 2016-05-03 13:18:32

Egoadsr
Member
Registered: 2016-04-20
Posts: 6

Re: Xfce display manager show wrong display modes

I'm not an expert but after seeking some sites on the net, i think the best way to you to obtain a result is to create a static conf using Xorg.conf.

I'm not quite sure but you can create one like described here : http://askubuntu.com/questions/4662/whe … e-x-there/

And configure it like described here : https://wiki.ubuntu.com/X/Config/Resolution/

Good luck wink

Offline

#13 2016-05-05 15:57:14

ryu
Member
Registered: 2016-04-25
Posts: 2

Re: Xfce display manager show wrong display modes

Thanks! I guess that's the optimal solution, but I managed to get it working well enough with compton.

Offline

Pages: 1

Registered users online in this topic: 0, guests: 1
[Bot] ClaudeBot

Board footer

Powered by FluxBB
Modified by Visman

[ Generated in 0.013 seconds, 9 queries executed - Memory usage: 734.66 KiB (Peak: 783.94 KiB) ]